Crawfish DTF, Sea Animal Print, Heat Press DTF Transfer, Lobster Print, Fisherman Gift DTF, Ready To Apply Transfer, Crimson Claws Print *** THIS IS A PHYSICAL PRODUCT, NOT A DIGITAL PRODUCT *** The size you purchase represents the long side of the design. Please take this into account when placing your order. This is not a digital product. Physical product will be sent. This purchase includes the heat transfer only. Black and white text color option: There is a white version of this design for black text or black objects in some parts of the design. In the listing, there is always a white design option in the sample images in the photos. You can examine the photos before purchasing. Care Tips: Turn inside out for washing, use cold water. Do not dry clean. Tumble dry on a low setting. These are instructions for using a heat press for DTF (Direct to Film) printing. Here's a breakdown: 1. **Prepare**: Cover the transfer with parchment paper or a Teflon sheet to prevent it from sticking to the heat press. 2. **Temperature and Time**: Set the heat press to 315 degrees Fahrenheit and apply medium to heavy pressure for 15 seconds. 3. **Peeling**: After pressing, wait at least 10 seconds before peeling. Then, check for ink release. You can peel the transfer either when it's warm or cold, depending on your preference. 4. **Re-Press**: After peeling, cover the transfer again with parchment paper or a Teflon sheet and re-press for an additional 5-10 seconds. 5. **Adjustments**: Keep in mind that different heat presses may require slight adjustments in time and temperature to achieve the desired results. Experimentation may be needed to find the optimal settings for your specific heat press. Following these steps should help ensure successful DTF printing with your heat press.