Toyota replacement switch panel 84-88 Pickup, 84-89 4runner. Condition is "New".
3d printed switch panels in black only for your 84-89 4runner and 84-88 pickup. These replace your current panel which may be a useless cubbie on the pickups or rear window defroster on 4runners (not intended for use if you have power mirrors).
These are made to order from high strength high temperature plastic. Please take care if you have to remove the panel. It is reinforced but the mounting tabs are only 2mm thick. Gently press the bottom ones In to release it. The bottom tabs are designed a little smaller for ease of removal. If you press too hard it may break a tab. **TIP, I WOULD HIGHLY RECOMMEND INSTALLING THE PANEL WHEN YOU ARE READY FOR FINAL INSTALL. FITMENT IS TIGHT AND IF YOU'RE DASH IS STILL INSTALLED IT WILL BE VERY DIFFICULT TO REMOVE BECAUSE OF THE LACK OF OPEN SPACE TO GET BEHIND IT. THIS IS WHERE TABS GET BROKEN.**
Pushing the panel in will be fine. It will snap into place.
Since these are 3d printed there may be imperfections from the printing process, this does not affect the functionality.
If you plan on painting it, I would recommend sanding lightly with 600 or 800 grit just to give it bite. Wood filler or plastic putty can be used to smooth out the texture like bondo. Prime and paint. I would suggest using SEM products. They make many colors that are very close matches to Toyota interiors. See attached picture for finished reference picture.
Should you encounter any problems please reach out to me.
Shipping price is CONUS, contact me for shipping quote for anywhere else.
These snap in place just like factory I have many options available. Any style can be done for RHD applications. Please contact me for a shipping quote outside the USA
Please indicate what option you would like in the message box when you make your purchase (A,B,C,D,E,F,G,H)
OEM switch versions (please ensure you are using OEM switches that measure 17mm W x 30mm H same style as pictured)
(A) 3 switch OEM
(B) 2 switch OEM
Carling style aftermarket (please ensure you use the type of switch pictured with the green check mark. The other style retaining clips will NOT fit)
(C) 3 switch Carling style aftermarket
(D) 2 switch Carling style aftermarket
Hybrid options (all hybrid panels will have the OEM switch/s on the left)
3 switch hybrid options
(E) 1 OEM switch 2 Carling switches
(F) 2 OEM switches 1 Carling switch
2 switch hybrid
(G) 1 OEM switch 1 Carling switch
(H) I can also do a complete blank, this would be flat with no switch holes. Good for a ram mount or similar.
Save on Toyota replacement switch panel 84-88 Pickup, 84-89 4runner with a Etsy discount code