ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent. To legally sell PRINTED models, monthly ACTIVE membership and a Seller Authorization form is required through one of two available platforms below: https://linktr.ee/flexifactory Please help support the creative work of each 3D artist and NEVER share or sell a digital file. This Robot Bee is an articulated Mostly print-in-place model that needs NO supports. I say "mostly" because the wings are printed separate with easy pop-in-place ball joints. Not only does this allow for more motion wings, but it also allow you to mix and match color combinations. Included are 4 files: -Cyber Bee -Left wing -Right Wing -Colored Bambu/Prusa .3mf file Also Optimized for AMS, meaning if you are using a Bambu or Prusa with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience! Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports. Please feel free to share images of your prints on this page, I would love to see 'em. Thank you. P.S. If you like this design, Check out my other models. https://www.cults3d.com/en/users/FlexiFactory/creations Affiliate link to my supplies used in the photos above can be found here: https://www.amazon.com/shop/flexifactory Easy Print. Can be scaled -No Supports (adding supports will hinder functionality) -Mostly Print-in-place (wings print separately and pop in) -15% infill -I always like to use 3 walls -PLA works great While popping in the wings , make sure you have the ridge of the wing lined up correctly with the notch in the body before you press it in place. This is designed to give you a guideline to avoid pushing too hard AND to keep the wings from spinning in circles!