Savings. Shopping.Get Checkmate
Want to use your work surface while traveling?
Want the truck to feel more open?
This solves your problem 0 Forscan needed! No alterations to the factory harness, plug and play with below OEM rotary shifters!
Currently Printed in PETG. **ABS profile is being calibrated
(There may be slight surface imperfections or otherwise due to the nature of 3d printing. I do my very best to make sure people are happy with what I send out the door. If you purchase and are not pleased reach out to me! I want people happy first and foremost.)
[0 credit to myself on discovery of use of rotary shifter! See: https://www.f150lightningforum.com/forum/threads/rotary-shifter-possible.18630/]
For use with Ford OEM Rotary Shifters
Part Numbers: LX6P-7P155-HE, LX6P-7P155-EH
Both exact same aside from the middle button label.
(I used LX6P-7P155-HE the "M button" varient)
(LX6P-7P155-HE is the part I used to design. However, there are other variations besides the above that **MAY** be compatible, I simply have not tested them.)
**UPDATE** I have gotten zero "varient did not fit" responses. All that appear to look like the part numbers above have, so far, fit the mount.
Screws are designed to be M4 course threaded but may be drilled some as wanted or needed. I made them smaller than the holes of the shifter to allow some slight adjustment for alignment of the rotary itself.
Console disassembly: https://youtu.be/fMfEKZ9qpHE?si=eHtcKZlZ5GT41Gnv
**Again, this IS a FMD 3D printed part. There will be visible layer lines and other imperfections!! (I do try to make things as nice as possible) The underside is NOT as pretty as the top due to support structures, however, none of the support interface is visible after install.
Notes & Post Processing Done:
I will clean the screw openings. Due to being on the lower side of the print they begin on supports.
To Install:
Simply remove the console sides, pop up the top cover, unplug the cup holder key sensor,remove the top cover, unbolt the factory console stick e-shifter, attach 1 of the above rotary shifters to this mount, plug it in, replace with 3 of the factory bolts, reassemble the console covers and viola! (I will be creating an install video when life and time allows)
***There may be slight fitment differences between vehicles. I will exchange and correct if this occurs.
If it breaks inside 45 days I will replace it.
If you feel the print broke, but due to a failure in the print structure or some other uncontrolable factor, I will replace it (I always reserve the right to deny but I do not want anyone dealing with a break that isnt on them). In this instance I would like some pictures and brief explanation of what occured so that I may correct whatever issues arise.
If warping ever occurs I will replace. Other filament options will be offered soon.
Liability Disclosure
By purchasing and using this 3D printed mount, you acknowledge and agree to the following:
Use at Your Own Risk: This product is a 3D printed part designed for a specific purpose. 3D printed materials may not be as strong or durable as traditionally manufactured parts. Installation and use of this mount are entirely at your own risk. I am not liable for any damage to your vehicle, the shifter, or any other property, or any personal injury that may occur as a result of using this product.
Professional Installation Recommended: While this mount is designed for VERY relatively straightforward installation, it is strongly recommended that you have it installed by a qualified automotive professional. Improper installation can lead to malfunctions, damage, or personal injury. I am not responsible for any issues arising from improper installation or any damage to your vehical that may happen during the original install.
Compatibility: This mount is designed for use with a specific Ford OEM shifter (see above part numbers) (please verify compatibility before purchase). I make no guarantees of compatibility with other shifters or vehicle models. It is your responsibility to ensure compatibility before purchasing.
Disclaimer of Warranty: This product is provided "as is" without any warranty of any kind, either express or implied, including, but not limited to, warranties of merchantability, fitness for a particular purpose, or non-infringement.
Limitation of Liability: In no event shall I be liable for any direct, indirect, incidental, special, consequential, or punitive damages (including, but not limited to, damages for personal injury, property damage, loss of profits, data, or use) arising out of or in connection with the use of this product, even if I have been advised of the possibility of such damages. ******My liability is limited to the purchase price of the product. ******
Off-Road Use: If this mount is used in off-road conditions, be aware that the stresses placed on the mount may be greater than in normal on-road driving. Regular inspection of the mount is crucial.
Governing Law: This disclaimer shall be governed by and construed in accordance with the laws of your State/Jurisdiction.
By purchasing this product, you signify your understanding and agreement to these terms. If you do not agree with these terms, do not purchase or use this product.
Save on 2021-2024 F150 **Lightning** Stick to Rotary Shift Conversion Mount / Cubby (Drop-In Replacement) with a Etsy coupon
Checkmate is a savings app with over one million users that have saved $$$ on brands like Etsy.
The Checkmate extension automatically applies Etsy discount codes, Etsy coupons and more to give you discounts on products like 2021-2024 F150 **Lightning** Stick to Rotary Shift Conversion Mount / Cubby (Drop-In Replacement).
Checkmate users have also been loving these products from Etsy.
Users have been saving products like this to their collections.
