Snacking Around The World Epcot DTF Transfer Ready to Press, Epcot Disney Transfers, DTF Prints Heat Transfer, DTF transfers, Disney Shirt
Hey there, 👋everybody👋! Thank you for visiting our 💎precious shop💎 and huge thanks if you have already 📦purchased📦 a product from us!
Please, know that we are here for 👉 you, if you need us regarding your purchases, if you have any 🤔issues with our products, or even if it`s just ❓questions❓ that you have for us. So, 📝 contact us 📝 in case of need and we`ll gladly do our best to help.
📦Ordering from our shop is simple, so just: 📦
➡️Choose a print and select the size.
➡️ 🛒 Add it to your cart. 🛒
➡️Add “Remove Background” to your cart (If the background of the design is not transparent)
➡️ ☑️Proceed to check out. ☑️
➡️Send your files via Etsy`s messaging system. 📧
Don`t forget that:
✅ Your files have to be in PNG format, with transparent background and 300 DPI recommended resolution, for best results.
✅ You must specify the print color,
✅ You can use Note to seller option for any personal requests.
✅ If you don`t provide a print ready PNG file, we will have to cancel your purchase.
✅ Your designs will be print in the size that you send us.
And, if you have already received your purchase from us and you are happy with it, please, don`t forget to give us ⭐ 5 stars ⭐. You will make us very 😇 happy 😇, if you ✍️ write a good review of us and attach a photo with it. We thank you in advance! 🤗
But how to apply your DTF transfers yourself, you ask?
1. Please preheat your shirt for about ⏱️15 seconds⏱️ and let it cool off after that (It will help remove excess moisture from the garment).
2. Put the DTF transfer on the 👕 shirt 👕 while the ink is facing down, as it must interact with the shirt.
3. Use your iron to press the shirt for about ⏱️15 seconds⏱️, while moving it around all over the transfer. But make sure to use temperatures between 🌡️150 and 170°C (or 302 to 335°F).🌡️
4. Remove the iron and let the shirt cool off for about ⏱️20-30 seconds⏱️.
5. Pill the transparent film off the shirt.
6. Use a parchment paper piece to cover the whole transfer and press one last time with your iron for not longer than ⏱️5 to 10 seconds⏱️.
7. That`s your final seal and now you have your own 👕 special shirt 👕.
⚠️ Very important! Please read the Warnings! ⚠️
- For the final seal of the DTF transfer, you can use parchment paper, butcher paper, tissue paper or a Teflon sheet.
- Be careful with the temperature of the iron! If it is too ♨️hot ♨️, you will most likely damage and even destroy the film and the transfer. Don`t overheat it!
- If you are using the iron method for the first time and haven`t tried it before, make sure to not press and move around too hard and rough with it. It might be best to just press on one stop, lift the iron and apply to a different spot.
- When removing the transparent film from the transfer, you should do it gently. If you notice that the transfer is not coming off completely, that means that the iron temperature was lower than needed. In that case, just put down the film back in place and repress with your iron. Let it cool and peel the film off.
👕 Shirt care recommendations include: 👕
• Turn the shirt inside out before washing it.
• Machine wash with cold water or low temp.
• ❌ Don`t use bleach or hard softeners. ❌
• ❌ Don`t iron the shirt on the transfer. ❌
• ❌ Don`t dry clean the shirt. ❌
• Use low heat for tumble dry.
Save on Snacking Around The World Epcot DTF Transfer Ready to Press, Epcot Disney Transfers, DTF Prints Heat Transfer, DTF transfers, Disney Shirt with a Etsy coupon