UV DTF 16 oz Glass Can Wrap *****PERSONALIZATION***** Add the diameter of your 16 oz Glass can for a better fit. The length will be proportionate to the diameter not going over 4.75”. If no diameter is listed the diameter will be 9.6” 9.6 wide X 4.6 length (on most designs) The width will always be 9.6. Depending on the design the length will be proportionate to the width without going over 4.6. This is the ready to apply UV DTF transfer. The Glass Can is not included with this purchase. This is NOT a digital file. Please wait a minimum of 24-28 hours before hand washing your glass gently in warm water. Do not use anything abrasive to wash the outside of your glass. Do no soak. Microwave and dishwasher are not recommended. 1. Clean glass. 2. Peel design transfer off paper backing. 3. Align and place the transfer on the cup. 4. Working from the center outwards, press the transfer down. Use your fingers or a squeegee to push out any bubbles. 5. Peel the clear film off slowly. *** Once the transfer is on the glass, you cannot reposition it. *** YouTube is a great place to start for application tips and tricks. • All transfers are non-refundable. • No returns are accepted. • When you purchase this UV DTF Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you). **** CCMbyCrystal is NOT responsible for lost or stolen mail.****