This is a custom retrofit to build a TRX4m into a 1/16th rig with a 191mm wheelbase and a WPL C24 Hilux Body. The WPL platform is less to be desired, but the bodies are awesome and cheap so now you can stick proven and widely availible 4M parts under it to make something awesome. The chassis itself has a ton of shock points and will work with the longer 66mm and 78mm shocks that are now availible for the 4M. Comes with special upper shock tower brasss that will allow bands on both the front and rear. Plenty of surface area inside to mount components and still able to fully utilize the WPLs toolbox battery tray. Works with all 4M parts including 370 motors and my 2-speed kit. Note* becuase the Meus 2 speed requires a bespoke trans plate it will not fit this chassis or be able to be used with rear links f/r. This chassis requires 2 sets of rear 75mm Hightrail links and matching rear shafts to achieve its 191mm wheelbase. Ultra smooth bottom and includes 2 front mounts that allow you to run with a bumper or remove it for a bettery approach angle. Kit includes: Full LCG Chassis LWB High Clearance Trans Plate SS Hardware (w/ shock spacers/ screws) Disclaimer: This is a 3D printed part. It is made from PLA+ Plastic. It has an inherent "layered" look and may require some slight modification if your vehicle is fitted with other aftermarket parts. Please view my packaging and inspect the package BEFORE handing it to young children. While my logo is suggestive, it is not unsightly, but may require the approval of a responsible parent before giving it (and the small contents inside) to a child. Due to a rather insane review I received, I need to state this, and be sure anyone else so inept HAD the opportunity to read this...