Savings. Shopping.

Get Checkmate

Shop at Etsy

Etsy ICE POI 2.0 - 95mm LED Contact Poi

$120

25 discount codes

Ice Poi 2.0 are sold as a pair 2 or as 3-Poi set 💠 95mm 200 gram (170 gram without capsule light) 💠 Ice frost powder grip finish 💠 Hybrid-flex texture (not too soft and not too hard) 💠 Built in decompression channels for easy charging 💠 Dust covers to keep the inside clean 💠 Phenomenal illumination 💠 Anti-crack 💠 Anti-scuff 💠 Easy to clean - use mild hand soap and water ✦ Uses V2 Capsules warrantied by flowtoys ⤷ 64 customizable modes ⤷ full color spectrum with over 60 billion colors ⤷ bright, custom high-temp LEDs, and global brightness control ⤷ accelerometer response ⤷ wireless control, syncing and connectivity ⤷ USB rechargeable and update-able ⤷ super durable & lifetime warranty by flowtoys - Shell modification by FoF does not void warranty. ✦ No-LED option available in drop down menu. These sets come with short modified cases without the LED circuit board for you to put your own flowtoys circuit boards into. ✦ Please provide your overall length... this is the entire poi tip-to-tip (including the knobs and balls). We recommend measuring from center of palm to arm pit and then adding 1 inch to that measurement. If you don't provide a length they will be set to 24 inches. ✦ Knob and Rope Information: Swivels are $20 per poi… Swivels spin the fastest for the “Orbital Trick” ⤷ You have to pay for them separate with this upgrade link here: https://etsy.me/2OPrGZA ⤷ In-line swivels: There is 2.75" of rope separating the swivel from knob. ⤷ In-set swivels: Swivel is inset into knob (tends to pinch your finger depending upon your grip-style; if you hold the rope when spinning these will work for you) ⤷ Bill Fisher KROK #7 dual rotation swivels ⤷ We either splice the cord up through itself to create a single strand or on thicker tethers we use heat-shrink tube. Bearings are $20 per poi - spin slower than swivels and requires technique adjustment to sustain the Orbital. ⤷ You have to pay for them separate with this upgrade link here: https://etsy.me/2OPrGZA ⤷ Can only be used on these practice knobs: TorQ-Zorb, TorQ, Tex-TorQ, Tex-Flex XL, Flex XL, TexFlex, PomGrip and Soft Px3 ✦ Knob Details: *1 single washer adds 4.5 grams of extra weight. For most knobs we recommend 2 washers. Heavier knobs = faster rotating toss. —>TorQ-Zorb - Weight: 17 grams - Height: 22mm // Width: 37.5mm - Soft grippy (not sticky) silicone - Designed by FoF - Can have up to 8 washers —> Sphere knobs - Weight = 30g - Diameter: 37mm - Firm rubber - silicone - Designed by FoF - Grippy but not sticky - 41 colors - Can have up to 8 washers —> TorQ - White, Black, #8, #10 #14, #16, #18, #25 are squishier than the other colors - Weight: 7 grams - Height: 22mm // Width: 37.5mm - 3D Printed in Maine - designed by FoF - Can have up to 8 washers —> Tex-TorQ - White, Black, #8, #10 #14, #16, #18, #25 are squishier than the other colors - Weight: 7 grams - Height: 22mm // Width: 37.5mm - 3D Printed in Maine - designed by FoF - Has a textured finish - Can have up to 8 washers. —> Tex-Flex: - 7 grams - 34mm Diameter x 23mm Tall - 3D Printed in Maine - designed by FoF - Has a textured finish - Can have up to 7 washers —>Flex XL: - 10 grams - 42mm Diameter x 28mm Tall - 3D Printed in Maine - designed by FoF - Can have up to 9 washers —> Tex-Flex XL - 10 grams - 42mm Diameter x 28mm Tall - 3D Printed in Maine - designed by FoF - Has a textured finish - Can have up to 9 washers —> PomGrip 2.0 - Weight: 12.5g - Diameter: 35mm // Height: 25mm - Half sphere shape. Squishy - Grippy like toothbrush grip material - Can have up to 4 washers —> Ovo Knob - 30g - Diameter: 35mm // Height: 48mm - Grippy like toothbrush grip material - Can have up to 8 washers —> Delphin Knob - Weight: 5 grams - Diameter: 34mm // Height: 23mm - Comparable in size to Flex standard knob - Firm foam-like material - Not slippery when wet - Can have up to 3 washers —> Px3 Knob (soft) - Weight: 10g - Diameter: 33mm // Height: 22mm - Small grip - Thermoplastic Rubber, *Pastels are hard - Can have up to 3 washers ✦ LED Knob Series: —> LED Luna - Soft grippy - 26 grams - Height: 30mm // Width: 36mm at widest and 25mm wide at base - Uses rechargeable DOT XL Pro chips by UltraPoi - Designed by FoF - Cannot have washers   —> LED TorQ-Zorb (frosted) - Soft grippy (not sticky)   - Uses rechargeable DOT XL Pro chips by UltraPoi - Designed by FoF  - Weight with chip and crimp: 27 grams  - Height: 22mm // Width: 37.5mm  - Cannot have washers —> LED Sphere Knob *NEW BRIGHTER DESIGN*  - Rubber  - Diameter: 39mm  - Weight with chip & crimp: 37 grams   - Cannot have washers   —> LED TorQ & LED Tex-TorQ  - Uses rechargeable DOT XL Pro chips by UltraPoi  - 3D Printed in Maine, designed by FoF  - Weight with chip and crimp: 16 grams  - Height: 22mm // Width: 37.5mm   - Cannot have washers   —> LED Flex XL & Tex-Flex XL   - Uses rechargeable DOT XL Pro chips by UltraPoi  - 3D Printed in Maine, designed by FoF  - Diameter: 42mm // 29mm Tall  - Weight (with chip and crimp: 18 grams  - Can have 1 washer = 22.5 grams   - The Tex has a textured gritty-grippy finish.   —> LED UltraKnob Pro  - Weight: 26g  - Diameter: 38mm // Height: 28mm  - Rope attaches directly to LED insert within the knob  - Uses Dot XL Pro (mini usb charger not included) - Warrantied by UltraPoi directly  - Cannot have washers  ✦ Tether Options **All Tethers shrink between 1.5 and 4 inches. The rate and quantity of shrink is dependent upon the rope, frequency of use, climate, UV exposure, and hand oils/dirt.** ~ Exception relaxed cotton stretches ~ Average shrink rates outlined below: —> 10.5 StatiX super stiff light weight juggling rope - Polyester - Meltable - Average shrink = .5 inch —> Specialty Nylon Ropes - 10mm Relaxed (loose braid) - Meltable * Average shrink = 2-3 inches - 10mm Hybrid (Perfect balance between stiff and relaxed for versatile flow) - not meltable * Average shrink = 1 inch -11mm Super Static —> VPC Rope - Polyester sheath with a vectran core - Highly versatile - Heavier weighted rope - Not meltable - Shrinks the most 2-4 inches dependent on use/environment —> JL Rope "Hybrid" - 10mm // 11mm // 12mm = White with red/blue fleck - Has a technora core - Very silky sheath - Heavier weighted rope - Not meltable -Average shrink = 1.5 inch —> Polyester Double Braid Rope - 5/16" or 3/8" - More popular for Pattern work and wraps - light weight - Stiffer than solid braid MFP - Meltable -Average shrink = 2.5 inch —>Smithy Rope from LanternSmith (Solid Braid) - 1/4" and 3/8" - Very relaxed & flexible braid (most floppy rope) - Light weight - Great for tether manipulations & pattern work - Meltable - Average shrink = .5 inch —> Dynamic Rope - Polyester and nylon sheath and core - Water Repellent Coating to slow degradation - Tight weave, but the sheath is loose over the core, allowing for “give” in the cord. - Versatile - Meltable - Average shrink = 1.5 inch —> Semi-Static Rope - Various diameters - Polyester and nylon fibers - Sheath is tight over core, creating a semi-rigid rope. - Used for juggling pre year 2023, but jugglers prefer StatiX rope now. - Meltable - Average shrink = 1.5 inch —> Cotton Rope 3/8” & 1/2" - Soft - Hand dyed by Brit - Relaxed or Stiff - Shades vary depending upon the batch - Stiff can shrink 1 inch and relax stretches 1 inch

Save on ICE POI 2.0 - 95mm LED Contact Poi with a Etsy discount code

Name: ICE POI 2.0 - 95mm LED Contact Poi
Price: 120 USD
Availability: InStock

Checkmate is a savings app with over one million users that have saved $$$ on brands like Etsy.

The Checkmate extension automatically applies Etsy discount codes, Etsy coupons and more to give you discounts on products like ICE POI 2.0 - 95mm LED Contact Poi.

Checkmate users have also been loving these products from Etsy.