Our custom metal stamps are designed for applying logos to flat metal surfaces as well as thick genuine leather. With this custom jewelry stamp, you can recreate a design on your handmade products to make them unique. The punch stamps can also be used for silver marking and as a knife maker's mark for blade stamping.
HOW TO ORDER:
— You should send a high-resolution black and white logo in JPEG, PNG or a VECTOR file in PDF format via Etsy messages after purchasing.
— Black areas of your logo will be raised on a stamp.
— A logo can be small enough (from 2 mm), but the lines of that logo must not be less than 0.25 millimeters thick. The minimum distance between the black lines of your logo should be at least 0.15 mm to be visible.
— The least diameter of a steel rod is 8 mm (for comfortable work with a hammer).
— ONE INCH = 25.4 mm
HOW TO USE:
— You should place your blanks on a solid flat surface (an anvil, e.g.).
— Then put the stamp perpendicular to the blank and make a strong, accurate blow with a heavy hammer.
— If you don't have enough power to make it, ask someone else to do it or use a press.
SPECIFICATIONS:
— A length of stamps' steel rod: from 60 mm to 120 mm (it depends on the size of a logo).
— The stamps' steel is hardened (the hardness is 54–58 HRC). In order to be used on steel, your material's hardness must be no higher than 43 HRC (or annealed to less than 43 HRC)
— Our steel rods have a special cross-hatching for comfortable holding when stamping. Stamps have a special mark for design orientation.
— That is a high-quality product made in Europe (stamps have high-resolution, high-quality and precision of lines).
Save on Custom Knife Makers Mark Stamp Makers Mark Knife Stamp Blacksmith Stamp Custom Touchmark Stamp Blade Stamp Hand Stamp Steel Stamps for Knife with a Etsy discount code