⚠️Please kindly note that we maintain a strict no-return policy for all sticker products once they have been used. This policy applies without exception as used stickers cannot be resold or reused. We appreciate your understanding and encourage you to carefully review your order before purchase. ⚠️ Note: Includes skin sticker only, device not included 🎮 Premium PlayStation Edition Skin Sticker for Anbernic RG40xx V Product Details: * Special PlayStation-themed classic design * Full coverage for both front and back of the device * High-quality premium material with residue-free adhesive * Easy installation and scratch protection * Specifically designed for Anbernic RG40xx V ✨ Key Features: * Sharp printing with vibrant colors * Durable material for long-lasting use * Unique PlayStation-style design 📦 Package Includes: * Front and back skin stickers * Cleaning cloth * Plastic squeegee for bubble removal How to Apply Stickers 🎯 1. Prepare Materials 🛠️ - Stickers to apply - 70% alcohol or non-corrosive cleaner, lens or glasses cleaner - Lint-free cloth - Plastic scraper or hard card - Hair dryer or heat gun 2. Clean the Device 🧼 - Clean with 70% alcohol or non-corrosive cleaner, lens or glasses cleaner (Don't apply directly to device, dampen cloth slightly, wipe gently, don't rub hard, and dry immediately) - Use lint-free cloth to dry - Wait 2-3 minutes to dry completely 3. Applying the Sticker 📝 - Gently peel off backing - Position correctly - Apply gradually from one side to the other - Use card or scraper to remove air bubbles from center outward 4. Check and Fix 🔧 - Check for air bubbles - If bubbles found, use plastic scraper again - If sticker isn't adhering well, use gentle heat from hair dryer or heat gun to soften slightly, then press down 4.1 If Using Hair Dryer 💇 - Set to medium heat, low air flow - Keep 15-20 cm away from device - Move in circular motion, max 5-10 seconds per spot - Stop if too hot 4.2 If Using Heat Gun 🔫 - Set to lowest temperature (about 100-150°C) 🌡️ - Keep 20-25 cm from surface - Keep moving, don't stay in one spot - Brief 2-3 seconds per area - Extra caution needed as much hotter than hair dryer 5. After Using Heat - Wait to cool before touching - Check sticker adhesion - Can repeat after cooling if needed 6. After Application - Wait 24 hours for adhesive to set completely - Avoid touching or cleaning during this time 7. Common Problems and Solutions 🔧 - Air bubbles: Use gentle heat and card to remove 💨 - Poor adhesion: Apply heat until adhesive softens, then press 👆 - Wrinkled sticker: Heat gently and smooth out 🔄 - Removal: Heat until adhesive softens, then peel slowly ↗️ Cautions ⚠️ - Apply in dust-free area - Avoid creasing sticker - Don't pull sticker forcefully - Beware of excess heat, especially from heat gun - Wait 24 hours before use ⏰ Difference Between Hair Dryer and Heat Gun 🔄 - Hair dryer: Safer, easier to control, better for beginners 👶 - Heat gun: Hotter, requires more care, better for experienced users 👨‍🔧 _____________________________________________________ How to Remove Stickers from Device 📱 Use hair dryer or heat gun to apply gentle heat to sticker corner When adhesive starts softening, use fingernail or card to lift corner gently Gradually apply heat while peeling section by section Peel slowly at 45-degree angle, don't pull too fast or hard If difficult, apply more heat and wait for adhesive to soften Clean with 70% alcohol or non-corrosive cleaner, lens or glasses cleaner (Don't apply directly to device, dampen cloth slightly, wipe gently, don't rub hard, and dry immediately) Use lint-free cloth to dry Wait 2-3 minutes to dry completely ⚠️ Caution: Don't use excessive heat