*Note, this listing is for a single-color decal. We do offer multi-color decals in our full color listings section.*
Please fill out the order notes section with the information you would like on your decal. After you have purchased, we will send a proof for you to approve before we complete your order.
Please let us know in the order notes section if you’d like the decal to go inside the glass as it will need to be reverse cut. The decal will be cut to be placed on the outside of the glass unless otherwise stated to us.
Family Owned and Operated business in Az, USA with the highest quality materials and the fastest turnaround time anywhere!
36” x 36” and larger decals will come in 2 sections for easiest install. Top section and a bottom section.
Application Steps: (Professional Installation Recommended)
Step 1. Clean the surface where you want to apply the decal using soap and water, or rubbing alcohol (70% isopropyl alcohol). Make sure the area is completely dry before applying the decal. Avoid using products with water-repellent properties.
Step 2. Use a squeegee to press the decal firmly onto a flat surface, ensuring it adheres well to the transfer tape and is ready for installation.
Step 3. Position the decal where you want it. Place a strip of masking tape vertically across the center of the decal, securing it in place. The tape should extend above and below the decal.
Step 4. The masking tape will act as a hinge. Carefully peel back the transfer tape with the decal from one side (left or right), and hold it back while you tear or cut away the backing paper from that side.
Step 5 Gently press the transfer tape with the decal onto the surface, starting from the center and moving outward. Use light pressure with a squeegee from the middle toward the edges.
Step 6. Remove the masking tape. Repeat steps 4 and 5 on the other side of the decal, completely removing the backing paper. Then, firmly squeegee the entire decal from the center outward.
Step 7. Once the decal is applied, slowly peel off the transfer tape from one corner, keeping the tape as flat and low to the surface as possible for an easy removal.
Last Step 8. Admire your perfectly applied, clean, and professional-looking decal without a background.
NOTICE: Vision Prints is not liable for decals damaged during installation. If your order is damaged upon arrival, please contact us before installation. We recommend professional installation, and a how-to video is available in the listing photos.
Save on Customizable Window Decal / Your Company Name or Logo Storefront Vinyl Sticker Window Door Lettering with a Etsy coupon