Savings. Shopping.Get Checkmate
Note: The Raspberry Pi CM4 is not included in the packing list!!!
* For the current version X652 (V1.0), please exclusively use the Tenda PoE injector due to PoE chip compatibility concerns. It is not compatible with other PoE switches.
Additional accessories need to be purchased by yourself:
Raspberry Pi Compute Module 4 CM4
A minimum 16 Gb class 10 memory card is recommended.（In fact, you don't need Micro SD card if you use CM4 with eMMC, because you can flash the firmware into the eMMC.)
NVMe SSD 2280 length
Geekworm Raspberry Pi-based KVM-Over-IP Family
Model
Compatible With
Work with X630
KVM-A3
Raspberry Pi 4 Model B
YES
KVM-A8
Raspberry Pi 4 Model B
YES
KVM-A4
Raspberry Pi Zero 2W
YES
X650
Raspberry Pi Compute Module 4(CM4)
NO
X652
Raspberry Pi Compute Module 4(CM4)
NO
X680
Raspberry Pi Compute Module 4(CM4)
NO
OverviewThe X652 is a Raspberry Pi CM4-based KVM-over-IP remote management PCI Express card that can be easily inserted into 1U and 2U form factors for PC, Sun and Mac platforms. it adds remote, unblocked, BIOS-level access and control to any server. Accessed from any Web browser, it provides anytime, anywhere KVM access with security, stability and speed.
The IP KVM PCI card offers KVM control from the BIOS-level onward. Reboot, monitor the entire boot process, and interact with your connected system easily, while the integrated remote ATX power control allows you to switch the machine on/off, reset it, and monitor power & storage LED activity remotely
User Manual:
Official Document: https://pikvm.org/
X652 Guide: https://wiki.geekworm.com/X652
Installation Video: youtu.be/vM1jNdh_6FQ
Features
Model:X652
Based on the Raspberry Pi Compute Module 4 and Compatible with all variants
Compatible with KVM V3 platform OS version only, not support V4
HDMI Full HD capture based on the TC358743 chip
Supports HDMI input resolutions up to 1920x1080 60Hz
Hardware Real Time Clock (RTC) with CR1220 coin battery socket
M.2 2280 KEY-M socket for Nvme SSD storage expansion
Gigabit Ethernet that supports data transfer speeds of up to 1000 Mbps
PoE Supported – Power over Ethernet for simplified installation(For the first version X652 (V1.0), please exclusively use the provided Tenda POE injector due to compatibility concerns. It is not compatible with other POE switches.)
Supports for powering via USB-C
Supports booting from Micro-SD, CM4 eMMC and faster M.2 2280 NVME SSD
Installs justs like any PCI card into a tower / desktop PC
Low profile and standard profile bracket Inside-both Mini and standard desktop host workable
Reliable remote network access to servers and computers
OTG Keyboard & mouse; Mass Storage Drive emulation
Equipped with a cooling fan X680-A1 to dissipate heat from your CM4
How to Power
The x652 v1.0 supports two types of power supply: PoE power and Type C power.
PoE power must use with a Tenda PoE injector, (As there is compatibility issue with PoE chip used by X652 V1.0)
Power Input: 5.1Vdc +/-5% , ≥3A (Power via USB Type-C PWR port of X652)
If you wish to use POE power, you need to purchase an additional Tenda PoE injector
X652 Packing List:
1 x X652 V1.0 Expansion Board
1 x X680-A1 V1.0 cooling fan board
1 x Colorful ATX Control Cable (Cable Length: 47cm / 18.50 inch)
1 x Mini HDMI to HDMI Cable (Length: 50cm/19.69)
1 x USB-A to USB-C OTG Cable (Length: 50cm/19.69)
1 x Standard height PCIe Add-in Card I/O Bracket
1 x Low height PCIe Add-in Card I/O Bracket
1 x Screws Pack
Save on Geekworm X652 V1.0 Open Source KVM Over IP Kit PCIe Version NVMe SSD Supported for Raspberry Pi CM4 with a geekworm.com coupon
Checkmate is a savings app with over one million users that have saved $$$ on brands like geekworm.com.
The Checkmate extension automatically applies geekworm.com discount codes, geekworm.com coupons and more to give you discounts on products like Geekworm X652 V1.0 Open Source KVM Over IP Kit PCIe Version NVMe SSD Supported for Raspberry Pi CM4.
Users have been saving products like this to their collections.
