Anko Craft Resin creates a glass-like finish that you can use in jewellery and home decor crafts. Pair with Anko silicone moulds to create desired pieces or pour over wood, canvas and ceramic bases. Personalise and colour the resin with Anko dyes and mix-ins. Anko resin will be dry to touch after 24 hours. Leave for 48 hours for the resin to harden completely. Drying time may vary depending on the room temperature. It is recommended to pair craft resin with Anko resin tools pack for correct equipment.<br /><br /><strong>Product Details</strong><ul><li><strong>Net volume:</strong> 150ml</li><li>Includes part A 100ml clear resin (95% liquid epoxy resins), part B 50ml hardener (100% aliphatic amines), 1 x plastic spatula, 1 x pair of nitrile gloves, 1 x 50ml measuring cup, 1 x 30ml measuring cup and instructions</li><li><strong>Dimensions/Size:</strong> 13cm (H) x 8cm (W)</li><li><strong>Material:</strong> Epoxy resin</li></ul><strong>Additional Information</strong><ul><li><strong>Directions for use:</strong><ul><li>Wear a pair of disposable gloves and lay down a disposable plastic sheet over your work area. Use in a well-ventilated space</li><li>Pour the desired amount of Part A: epoxy resin into measuring cup and allow to settle for 10 seconds to prevent bubbling</li><li>Using Part B: hardener, pour in half the amount of Part A: resin that you used. (eg. 30ml&nbsp;Epoxy Resin = 15ml hardener)</li><li>Mix with a disposable mixing stick for 4 minutes. Mix slowly to prevent bubbles in the mixture</li><li>If Resin Mix-ins or Dyes are desired, you can add them into the mixing cup before you pour your resin or you can add them into the mixture after pouring it into the mould</li><li>Pour resin into the desired mould and allow it to dry for 24 hours. Note that resin may not fully harden for up to 48 hours</li></ul></li></ul><strong>Warning: </strong>Keep out of reach of children. Wear eye protection when mixing or using. Avoid contact with skin. Follow usage instructions carefully.