They not only look amazing, but they will last you for years!Modern Lighting Get the look and feel of a high-end luxury vehicle. The VLEDS Dual Output footwell kit will provide a better driving experience by adding comfort and a feeling of safety. 5X Brighter The striplight bars are small but produce a considerable amount of light compared to cheap, flexible strip lights that are ten times the size. No plastic or fiberglass parts, the circuit boards are aluminum metal core PCBs housed in a CNC'd aluminum (not cast) body and then finished with a high-quality exterior-grade black anodizing. Color options There are six options to choose from. Color temperature is primarily a style choice. 5000K is natural white, 5500K is pure white, and 6000K is white with a tint of blue. Choosing a color is ultimately it's up to you depending on your lighting goals. As for the color options, Aqua is a very close match to the backlighting of the buttons and switches. Blue is a deep true blue, and of course, Red is a vibrant rich red. New Harness Like the previous version, there is no splicing or tapping into your factory wires. The new, easier-to-install OEM-style breakout harness by Redside Electric now installed between the factory harness and the overhead panel assembly. This harness enables paralleled functionality by combining footwell and dome lights with the factory overhead light switch.Dual Output PWM dimmer module allows for two output modes depending on the scenario:Courtesy Mode: Open the door, and the lights are at full output (200LM per side) and fade out with the map and dome light when the door is closed.Night Mode: While driving at night, a soft ambient light adds a sense of spaciousness throughout the cabin. If you want it brighter, use the included screwdriver and turn it up to your liking. The output is factory set to approximately 10LM (the lowest setting). Night Mode will not turn off when the factory dome light switch is in the off position.Included:✔ 2x BAR_21 BAR_21 LED Bar Light✔ 2x BAR_21 LSE VHB Tape for Smooth Surfaces✔ 1x VLEDS High/Low PWM Dimmer✔ 1x Dimmer LSE Mounting Tape✔ 1x PWM Adjustment Screwdriver✔ 1x Switched OEM-style Breakout Harness by Redside Electric✔ 1x 4 Foot Wire Extension✔ 8x Small Zip Ties ADD INTERIOR LED MAP, DOME AND VANITY LIGHTSAdding that perfect touch to your interior lighting couldn't be any easier! Simple plug n' play installation, only takes a few minutes and the results are phenomenal! Our products use the highest quality LEDs for maximum output and lifespan. These LEDs are 3-5 times brighter than standard bulbs.Please Note:➜ Rear add-on kits are also available. See our recommended products below.➜ Night Mode will not turn off when the factory dome light switch is in the off position.➜ It's nearly impossible to get an EXACT match in color temperature because of variations in the manufacturing of LED products. The only way to make sure that you get a perfect match between products is to purchase all your LEDs from us, as we have the highest standards in color temperature accuracy.➜ The higher Kelvin number of color temperature DOES NOT mean the light will be brighter, in fact, it is quite the opposite. The higher the Kelvin, the lower the output.Installation Guide:Installation Instructions Here
Save on 2016-2023 Toyota Tacoma Switched Dual Output Footwell Kit + Interior Lights with a TACOMABEAST promo code