The Pease Fiberglass Door with beautiful Mahogany grain detail. Replace just your door slab and keep your existing jambs and brickmold. A perfect replacement for Pease (carbon & steel) doors as well as most entry doors by Stanley, Taylor, Mastercraft, Perma Door, Castlegate, Masonite, Therma Tru, Jeld-Wen, Plastpro, and many others. Please make sure to check your measurements (door height, width, and thickness) and feel free to contact us with any measurement or fit questions. Highest quality wood grain fiberglass for easy finishing & durability Neutral tan finish that can be painted or stained, see our paint category to purchase paint/stain Modern 2 panel 3/4 length style looks great with or without glass. Additional glass options can be found in our door glass section. This door also has an ideal panel configuration for a pet door to be installed in lower panel. Sizes & Measurements: Style: 2 Panel 3/4 Length 31.75" x 79": Slab width: 31.75" (referred to nominally as a 32", 2/8, or 2-foot-8-inch-wide door) Slab height: 79.0" (referred to nominally as an 80" or 6' 8" tall panel) Panel Thickness: 1.75" Select 2 Panel (no cut out), With Glass: Clear 1 Lite (installed), or Without Glass: 23" x 49" Cut Out (takes standard 3/4 Lite glass in our door glass section) 35.75" x 79": Slab width: 35.75" (referred to nominally as a 36", 3/0, or 3-foot-0-inch-wide door) Slab height: 79.0" (referred to nominally as an 80" or 6' 8" tall panel) Panel Thickness: 1.75" Select 2 Panel (no cut out), With Glass: Clear 1 Lite (installed), or Without Glass: 23" x 49" Cut Out (takes standard 3/4 Lite glass in our door glass section) 31.75" x 95": Slab width: 31.75" (referred to nominally as a 32", 2/8, or 2-foot-8-inch-wide door) Slab height: 95.0" (referred to nominally as an 96" or 8-foot-tall panel) Panel Thickness: 1.75" Select 2 Panel (no cut out), With Glass: Clear 1 Lite (installed), or Without Glass: 23" x 65" Cut Out (takes standard Full Lite glass in our door glass section) 35.75" x 95": Slab width: 35.75" (referred to nominally as a 36", 3/0, or 3-foot-0-inch-wide door) Slab height: 95.0" (referred to nominally as an 96" or 8-foot-tall panel) Panel Thickness: 1.75" Select 2 Panel (no cut out), With Glass: Clear 1 Lite (installed), or Without Glass: 23" x 65" Cut Out (takes standard Full Lite glass in our door glass section) Prep & other specifications: Select either No Hinge or Lock Prep or Standard Hinge & Lock Prep: No Hinge or Lock Prep: allows for lock placement as desired and hinge side edge unfinished and can be mortised for hinge placements as needed PEASE Standard Hinge & Lock Prep 79" tall doors: Hinge mortise (cut out) 6.5" from top of door to top of first hinge, 37.5" to top of second hinge, 68.5" to top of bottom hinge Tubular lock prep comes for 2 3/8" backset lockset and means the door will have two 2.125" holes 5.5" apart, each hole 2 3/8" from the center of the hole to the edge of the door, with the top hole center 40.375" from the top edge of the door PEASE Standard Hinge & Lock Prep 95" tall doors: Hinge mortise (cut out) 6.5" from top of door to top of first hinge, 32.5" to top of second hinge, 58.5" to top of third hinge, and 84.5" to top of bottom hinge Tubular lock prep comes for 2 3/8" backset lockset and means the door will have two 2.125" holes 5.5" apart, each hole 2 3/8" from the center of the hole to the edge of the door, with the top hole center 56.375" from the top edge of the door Trimming: Can trim up to 2 inches off bottom, then we recommend sealing thoroughly with caulking and capping with a U-style doorsweep. Sides and top are not trimmable. This is a replacement for most entry doors (front, kitchen, side, garage/man door, etc.) and can also often be trimmed and used as a replacement for patio doors which are typically shorter in height (contact us to discuss if you need a door that requires more than 2 inches of trimming off bottom)