Savings. Shopping.Get Checkmate
Stain & Finishing Oil is a wood conditioner, stain and top coat all in one that offers exceptional durability in high traffic areas like table tops, kitchen cabinets, and even flooring.
Can be used on bare wood or over previously painted surfaces.No additional top coat required - it is highly durable as is. If you're looking for added durability, applying a coat of Natural will increase sheen and durability without intensifying your colour.
If you apply it over Fusion Mineral Paint™ for a glaze effect or to increase the sheen, we recommend removing excess right away, as the SFO will not soak in and may leave a sticky finish that takes a few days to dry.
Use the Natural colour over Fusion Mineral Paint™ colours to increase the sheen and offer superior durability, or brush on one of the pigmented colours and wipe off immediately for a beautiful, easy glaze effect.
Our special blend is highly concentrated in pigment, so a little goes a long way. The 237 mL container will cover the same area as 1 litre of comparable stains.Please keep in mind that all oil based products typically yellow in time. Using this over top of a white paint, will cause a slight yellowing effect. We recommend our Tough Coat for going over lighter colours to avoid yellowing.
Fusion™ Mineral Paint Stain & Finishing Oil over bare wood.
Using our Stain and Finishing Oil (SFO) over bare wood is a straightforward process:
Begin by generously applying the SFO either by pouring it onto the surface or brushing it on, ensuring even coverage on the properly prepped and sanded wood.
After allowing it to penetrate for anywhere up to 15 minutes, remove any excess with a clean rag. For added depth of colour or increased sheen, consider applying a second coat after the recommended re-coat time of 9 hours.
The natural pigments in the SFO enhance the wood's grain, offering a beautiful accentuation. This product is a blend of natural oils and resins designed to penetrate deeply into the wood fibers, creating a robust, and water-resistant finish.
Unlike traditional topcoats, SFO doesn't form a surface film; instead, it becomes an integral part of your wood, providing long-lasting protection and enhancing its natural beauty.
Stain & Finishing Oil over Fusion™ Mineral Paint
Stain and Finishing Oil (SFO) can be used over larger surfaces to increase protection and the sheen, the more coats you apply the more increase in sheen will occur.
Using over Fusion™ Mineral Paint to increase the sheen, depth of colour and durability simply buff on a very thin amount of the Natural ( clear).
Using pigmented SFO can act as an antiquing glaze which adds age and character.
Over larger painted surfaces the SFO needs to be applied in thin amounts and buffed on. Applying in long strokes from end to end can result in lines or streaks. Over table tops for example you should apply the SFO in circular motions and ensure the excess is removed. You are aiming for the thinnest, even application possible.
Here is a video showing you how
See more about these amazing finishes here.
Application Tool
Brush, lint free rag, applicator pad
Location
Interior
Re-coat Time
9 hrs
Top Coat
No additional top coat is required.- this is made strong enough for floors and table tops. However, you may use wax or "Natural" colour Stain & Finishing Oil to increase the sheen but not deepen the colour.
Clean Up
Odourless Solvent
Coverage
40-75 sq.ft.
Finish/Sheen
Matte to a high sheen. Each additional layer and buffing increases the sheen.
Recommended Uses
Reclaimed wood, bare wood, table tops, floors, most any surface, painted finish or Milk Painted pieces.
Can Be Applied To
Use as a stain over raw or well-sanded wood; apply over the painted surface for added sheen, glaze effect, or added protection; seal milk paint or other porous paint. Not recommended over light colours as it will yellow.
Can Be Painted Over
Once dried if over bare wood and only 1 coat applied, 10 days after for multiple coats applied. Test to ensure prior to tackling a full project.
How to Prep
Apply over any surface or top coat for the desired effect except wax.
Cure Time
10 Days
Maintenance/ Cleaning
Light cleaners, as they will strip away the natural oil.
Save on Stain & Finishing Oil - SFO with a Fusion Mineral Paint discount code
Checkmate is a savings app with over one million users that have saved $$$ on brands like Fusion Mineral Paint.
The Checkmate extension automatically applies Fusion Mineral Paint discount codes, Fusion Mineral Paint coupons and more to give you discounts on products like Stain & Finishing Oil - SFO.
Checkmate users have also been loving these products from Fusion Mineral Paint.
Users have been saving products like this to their collections.
