*This is a CAR KIT, it does NOT include motor, esc, servo, or radio, this is ONLY a chassis* This is 3Racing 1/10 Sakura D6 Sport Fibre Glass Version 2WD Drift Car Kit EP. The transmission, motor weight distribution and centre gravity of the body roll are the most concerned. finally, our design team would like to provide a crazy inspiration, 3 kinds of motors placed and 3 kinds of transmission driven are created. Feature: Newly slim front bulkhead with castor adjustment to obtain 2-8 degrees it neededImprovement of the coolest outlooks is our mission in the d6 project, we designed a set of emulate callipers and brake discs ( stainless steel 34mm for front and 32mm for rear )After the D5 bevel gear transmission experience, we would like to bring a 2.71 ratio belt drive transmission for the D6, The belt drive can obtain the most linear acceleration for the medium-sized trackD5 bevel gear transmission is 1 of the stability solutions, on the D6 project, we would like to keep the D5 transmission on the D6 platform for the slippy track, the ratio 3.0 performance also presents excellent condition on the small trackRatio 2.6 The common idler gear transmission is convertible for the D6, we would like to convert this transmission for the large track with sliding, all D6 transmissions can cover all environments from tiny to hugeTo improve the D6 steering angle for sliding, the design team created the KPI knuckle exclusive for the D6 cover front and with an active toe for the rearAll pivots cover the upper and lower wishbones, The rear lower wishbone has a 3mm offset adjustment to extend your wheelbase from 257-260mm, all wishbones use carbon resin causing the flexible chassis to obtain more response to the handling, so the harder wishbone must haveThe newly exclusively designed flexible chassis for the D6, especially the tail part is trimmed to obtain the most grippingAccording to the lower deck, the D6 upper deck is trimmed at the same point for the twist, the servo is placed backwards to process the weight distribution and the balanceThe smart rapid battery tray is inherited from the successful Cero Ultra, the chassis comes with 3 shifts of battery placing to set your weight distributionThe tiny lower bumper gives you less preload for the absorber movement and more room for the radiator accessThe newly designed 6 x 1.3 piston gives a huge improvement in the absorber effect12mm heavy-duty wheel hubs are includedRelocated all body posts for fitting the body and the rear body post comes with a stiffener to give you the body-roll stabilizingRear shock tower designed cable slots for the wiring routingReverses the rear lower wishbones to extend the wheelbase from 257 to 260mm3 KIND OF DRIVETRAIN OPTIONS ( BELT / BEVEL / IDLER GEAR )3 KIND OF MOTOR POSITION OPTIONS ( UMR / URR / LRR )NEWLY PIVOT BALL SUSPENSION SYSTEMSLIM FRONT BULKHEAD WITH CASTER ADJUSTMENTEMULATION CALIPER AND BRAKE DISCNEWLY DESIGNED KPI KNUCKLENEWLY DESIGNED MAIN CHASSIS LAYOUTNEWLY DESIGNED UPPER DECK LAYOUTRAPID BATTERY TRAYTINY FRONT LOWER BUMPERNEWLY 6 X 1.3mm PISTON IN ABSORBER 12mm HEAVY DUTY WHEEL HUBNEWLY DESIGNED BODY POST WITH STIFFENER18mm MAGNET WITH METAL DISCSPEED CONTROLLER CABLE TERMINALEXTREME STEERING ANGLESTEERING WIPER WITH VIBRATION RESISTANCE BOLT6mm OFFSET TINY 10 SPOKE RIMWAER- RESISTANCE PE TIRESINFINITY ABSORBER ANGLE ADJUSTMENTREAR WISHBONES WITH FLIP CONVERT WHEELBASE NOTE: Photos shown assembled with electronics are for display purposes only. Actual assembly required; does not include electronics. Require: Radio System (Min. 2ch) ESC Motor Servo Pinion Body Battery Charger