Woolich Racing Race Tools requires the ECU to be flashed with their software. This is NOT a stand alone product. Your ECU will need to have been flashed by Moore Mafia in order for us to activate these features in your ECU and upload our custom parameters. If your ECU has already been flashed by us previously, and you would like to add Race Tools, then please purchase the ECU REFLASH, when checking out with Race Tools.  This Race Tools package allows us to enable the Quickshifter and Launch Control features in your stock ECU. This package includes: High quality strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Woolich Race Tools Harness which allows the quickshifter to be plugged into the bike's wiring harness Quickshifter Kill times are configured and customized per gear with 3D maps allowing kill times to be set for the full range of TPS and RPM combinations. This quickshifter kills BOTH fuel and ignition. Launch Control allows you to configure Delay, Launch RPM, Ramp Time and Ramp RPM. We will mail your race tools kit back with your ECU after it's been flashed and race tools have been activated. We will also mail specific installation instructions. Some harnesses use either the stock exhaust valve or AIS/PAIR plugs on the bike's harness, these systems will need to be disconnected on your bike for installation.  * Email us at teammooremafia@yahoo.com after ordering if you have aftermarket rearsets and/or are using a race shift pattern. We will swap the shift rod for a generic rod that can be cut to the necessary length for your specific needs.