Pillar Perfect Get ready for a new experience with your wax concentrates! The Wulf Mods Pillar Mini E-Rig is revolutionizing the game as the world's first smart E-rig with TGT heating technology. Made with a durable zinc alloy body, a magnetic connection, and adjustable airflow, the Pillar offers three voltage settings (3.2V, 3.7V, and 4.2V), a 10-second preheat mode, and a 30-second safety cutoff to ensure optimal performance. With its powerful 1,400mAh battery, this device also includes a Type-C port for quick and convenient charging. How to Load the Pillar E-Rig: To get started, pour water into the glass up to the water line at the top of the hole. After that, add your concentrate to the coil. Then, connect the glass to the battery and adjust the airflow valve to customize your vaping experience. How to Start Using the Pillar: To activate the device, simply press the power button five times quickly. Once turned on, adjust the temperature by pressing the power button three times. To begin the preheat cycle, press the power button twice, and wait for the device to preheat for 10 seconds. To power off the device, press the power button five times. How to Charge: It is recommended to charge the unit for 1.5 hours upon receiving it. Charging the battery beyond this time may harm or decrease its longevity. You can confirm that the Pillar is completely charged by checking that the LED on the button has turned off. Troubleshooting: The device will alert you by flashing white lights ten times if it heats continuously for over 15 seconds. If there is a short circuit, the device will flash red lights five times. To indicate low battery, the device will blink red lights ten times. When there is no atomizer, the device will flash red lights three times. What’s Included: (1) Wulf Pillar Kit (1) TGT QUAD Coil (1)n Type-C USB Cable (1) Instruction Manual WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge or use any other charging cable other than what comes with your battery. Failure to follow these instructions could result in battery damage and frying of the internal system.