<div id="desc"> <h3>A Complete Lawn Mower Blade Sharpening System</h3> <p>This kit has everything you need to sharpen lawn mower blades. A Grinder, dust collector and blade balance with a stand and all the attachments needed to mount everything. </p> <h3>The Kit Contains:</h3> <p></p> <ul> <strong>MAG-8100 1/2hp Sharpener</strong> <p></p> <ul> <li>The <a href="/collections/magna-matic/products/mag-8100-standard-lawn-mower-blade-sharpener-1-2-hp">Magna-Matic 8100 1/2hp Standard Lawn Mower Blade Sharpener</a> has an incredibly rigid design that delivers smooth, solid grinding, and makes sharpening conventional flat mower blades comfortable and easy. The Magna-Matic 8100 makes it easy to maintain a 30 degree cutting edge angle without complicated adjustments or time consuming tools. A single crank raises and lowers the wheel, and it stays where you adjust it. Simply lower the wheel until it almost touches the worktable, and it will cut a 30 degree angle (+ or - 0.5 degrees) over the life of its 7" diameter grinding wheel. Sharpen any length cutting edge. Sharpen right or left-handed blades. Sharpen a commercial mower blade in 1-2 minutes without burning the single direction motor.</li> </ul> <p></p> <strong>MAG-200-4H Dust Collector</strong> <p></p> <ul> <li>The <a href="/collections/magna-matic/products/magna-matic-mag-200-4h-dust-collector-for-mag-8100-and-mag-8200-sharpeners">MAG-200-4H Dust Collector</a> is specifically set up to collect dust from the 8100 sharpener. It features 3 stages of filtration that safely draw live sparks, dust, and grit.</li> </ul> <p></p> <strong>MAG-10400 Service Center Stand</strong> <p></p> <ul> <p>The <a href="/collections/magna-matic/products/magna-matic-mag-10400-sharpener-service-center-stand">MAG-10400 Service Center Stand</a> is designed to hold your Magna-Matic Grinder, Dust Collector and Blade Balancer in one convenient spot.</p> </ul> <p></p> <p></p> <strong>Magna-Matic Blade Balancer</strong> <p></p> <ul> <p>The <a href="/products/magna-matic-mag-1000-blade-balancer">MAG-1000 Blade Balancer</a> mounts on the stand allowing the blade to hang in a horizontal balance position. Strong magnets hold the blade in place. Cone size fits blade hole widths 5/16" to 1-1/2" diameter. Made of the finest precision steel for a long life. Special sealed bearings for precision balancing. </p> </ul> <strong>Mounting Brackets for Dust Collector</strong> <p></p> <ul> <p>The <a href="/collections/magna-matic/products/magna-matic-mag-200-20-kit">MAG-200-20-KIT</a> consists of 4 brackets that provide a way to mount a Magna-Matic dust collector to the MAG-10400 Sharpener Service Center Stand. With these brackets, you can mount the MAG-200-4H dust collector to the stand. The brackets come with all the necessary hardware for mounting to a Magna-Matic stand. </p> </ul> <p></p> <strong>Dust Collection Connector</strong> <p></p> <ul> <p>The <a href="/collections/magna-matic/products/magna-matic-4-dust-collection-flange">MAG-200-36 Dust Collection Flange</a> is the part you will need to connect the MAG-8100 sharpener to the MAG-220-4H Dust Collector.</p> </ul> </ul> <p></p> <p>Made in the USA by Magna-Matic</p> </div> <h3>Professional Machines Return Policy</h3> <p>This machine is intended for professional use. As per our Professional Machines Returns Policy, returns will only be accepted for new, unused machines. A 25% restock fee will be charged for new, unused returns. In cases of manufacturing defect, please contact us for replacement information.</p>