<p>This is the ultimate repair kit for fixing your broken Apple watch. If you have a broken screen or a broken back cover this kit will help you do the job right and get you to open your watch and unscrew the special screw inside the watch. You will still need a heating plate, heat gun, or hair dryer with good heat to soften the glue your watch originally has so you can use the pry tool and other tools here to finish the job! </p> <p><strong>Repair Ninja Note:</strong> Fixing an Apple watch is not an easy task. We suggest you watch our <a href="https://www.youtube.com/joesge">YouTube channel and search for the model you </a>have on our channel so you can see the entire process we use to take the watch apart. If you are replacing one part like the battery and you end up not following our YouTube how-to videos properly you can damage your screen or other parts which would make your repair more expensive. Be careful and make sure you learn before you buy this repair kit. </p> <p><strong>Apple Watch Ultra 1 &amp; 2 Back Cover Note: </strong>If you are replacing the back cover only your Apple Watch Ultra the back cover requires a T6 screwdriver which is not included in this kit. We do sell the T6 screwdriver. These repair kits are for all Apple watch screen and back cover repairs but the Ultra 1 and 2 have one more screwdriver that is required for removing the back cover. </p> <p><a href="https://www.joesge.com/products/electronics-cold-press-lamination-adhesive-seal-3ml-syringe-18-gage-tip-glue">Cold Press Glue Details Information. This includes dry time and suggestions.</a></p> <p><strong>Included In Apple Watch Repair Kit:</strong></p> <ul> <li>1 x Y 0.6mm Y Screwdriver (Special Tip Used Inside The Watch) </li> <li>1 x Thin Pry Tool </li> <li>1 x Nylon Spudger </li> <li>1 x 3mL Syringe + Syringe Tip + 18 Gage Tip + 3ML of Cold Press Glue. (Adhesive Color Of Choice.) </li> </ul>