Venom HE H87 F12 PCBType : Hall effectMaterial : FR4Thickness : 1.6mm F1-8X HE Aluminium PlatesMaterial : AluminiumThickness : 1.5mmLayout : F12 TKL F2-84 HE Aluminium PlatesMaterial : AluminiumThickness : 1.5mmLayout : F12 TKLinclude : JST 150mm Cable Frog TKL HE F12 Aluminium PlatesMaterial : AluminiumThickness : 1.5mmLayout : F12 TKL*Caution: Not compatible with F13 WKL  Glare TKL HE Aluminium PlatesMaterial : AluminiumThickness : 1.5mmLayout : F12 TKLinclude : JST 150mm Cable Tiger 80 Lite HE Aluminium PlatesMaterial : AluminiumThickness : 1.5mmLayout : F13 TKLInclude : JST 150mm Cable Venom HE Foam SetF12 Plate foam (3.5mm)EPT Case Foam (3.0mm)IXPE Switch Film (0.5mm) To change key settings, refer to this page:Key Setting Compatible SwitchesGEON Raw HE SwitchGEON Raptor HE Gaming Switch   Keep in mindPCB does not include a JST cable and screws.Plates include screws compatible with Venom PCBs.O-rings must be used on F1-8X / F2-84 Keyboard kits.Tadpoles must be used on Frog TKL F12 Keyboard kits. All products are made in the size of Hiney H87c/H87nu, which is the standard in the custom keyboard sector.Before you start assembling the PCB, please carry out a PCB test and check if all keys function. Before assembling the screws, remove the yellow tape on the stand-offs of PCBs.Whether or not to use foam sets is optional. Cut the space bar area of the foam set to fit your keyboard layout.To assemble the PCB and the plate, you must use all 14 screws. After removing the C-type port once, you cannot put it on again.Remove the daughter board installed above the arrow keys before usage, since electricity may go through.Daughter board and C-type ports are made of FR-4, which means you must use a nipper. If you use tools made for other uses such as scissors, the product may be damaged.  These PCBs, such as photos, are not eligible for exchange or refund. The stabilizer mounts normally.