Savings. Shopping.Get Checkmate
PH5SAN43600A (Condenser)
Description
PH5SAN43600AP = Entry / Brand TypeH = HP / OD Type5 = 14.3 SEER2S = Single-Stage / OD Design TypeA = Major IterationN = 208-230-1 or 208/230-1 / Voltage36 = 36,000 BTUH (3 Tons)0 = Standard / Feature0 = Standard / Special FeatureA = Standard HP / RegionNOTE: Ratings are subject to change at any time. Always refer to the AHRI directory (www.ahridirectory.org) for the most up-to-date ratings information.Features / BenefitsEfficiency
14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2 (depending on unit size and indoor combination installed
Indoor air quality accessories available
Sound
Sound levels as low as 69 dBA with accessory sound blanket
Comfort
System supports programmable or standard thermostat controls
Reliability
Non-ozone depleting R-410A refrigerant
Scroll compressor
Internal pressure relief valve
Internal thermal overload
Loss of charge switch
Filter drier
Balanced refrigeration system for maximum reliability
DurabilityProtection Package:
Solid, durable sheet metal construction
Dense wire coil guard
Applications
Long-line - up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.38 m) evaporator above condenser (See Longline Guide for more information.)
Low ambient cooling (down to 0°F/-17.8°C) with approved low ambient accessory kits
PF4MNXB36L00 (Air Handler)
Description
The design features contoured condensate pans with rugged drain connections, ensuring that little water is left in the unit at the end of the cooling duty cycle. The lack of standing condensate and corrosion free pans improves IAQ and product life, features homeowners appreciate.Standard features include grooved tubing and louvered fins. Coil circuiting has also been updated to make the most of all Payne heat pumps and air conditioners. Units come with solid state fan controls, 1-inch (25mm) thick insulation with R-value of 4.2, multi-speed motors, and fully-wettable coils. Units can accommodate factory- and/or field-installed heaters from 3 to 30 kW.Assembled at the factory compliant with low leak requirements of less than 2% cabinet leakage rate at 0.5 inches W.C. and 1.4% cabinet leakage rate at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.The PF4MN fan coil design is loaded with popular features. These fan coils utilize the latest in electronic commutation motor (ECM) technology through the use of high efficiency, multi-tap ECM motors allowing reliable air delivery with increased static pressure. It comes in a pre-painted (taupe metallic) galvanized steel casing and a factory-supplied power plug for ease of installation. The unit is shipped with a R-410A refrigerant TXV (sizes 18–60).STANDARD FEATURES
Multi-tap ECM (electronic commutating motor) motors – all sizes
Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board.
Five available speed tags to meet a wide range of applications
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Cabinet construction features innovations designed to prevent cabinet sweating.
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements.
Super-thick R-4.2 insulation with vapor barrier
Pre-painted galvanized steel cabinet (taupe metallic)
Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and cabinet air leakage less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units
Horizontal hanging provisions on cabinet
No tools required to access filter.
Newly improved filter rack area filter door insulation added for improved air seal.
3 through 30 kW accessory heaters - field installed
Factory-supplied power plug
Easy plug-in provisions for heater installation.
Entry options for high and low voltage wiring hook-up.
Leak-preventing sweat connections
Thermostatic expansion valve, TXV, on all coils
Designed for manufactured housing applications.
Save on Bryant 3 Ton 15.2 Seer2 Heat Pump Split System with a Go Direct Appliance discount code
Checkmate is a savings app with over one million users that have saved $$$ on brands like Go Direct Appliance.
The Checkmate extension automatically applies Go Direct Appliance discount codes, Go Direct Appliance coupons and more to give you discounts on products like Bryant 3 Ton 15.2 Seer2 Heat Pump Split System.
Users have been saving products like this to their collections.
