This is the Tsunami air water separator we install on the Kingslinger Soft Wash System. It helps to prevent water and moisture getting into your pump.  With the automatic float valve, it's not uncommon to see water shoot out of the drain hole at the bottom.  This means the Tsunami is doing it's job. When water and moisture get into the pump, this can cause stalling issues.  Since we use the Flo Jet pumps, and specifically the 10GPM dual stack, stalling is usually limited to one pump.  The stalling usually only last a few seconds too. Unique up-flow separation takes place as air reverses direction 180° and passes through a special stainless steel mesh element Integral float drain ejects water and oil from large drain sump Removes large amounts of moisture (Up to 1 quart of water/oil per min.) Great point-of-use protection for air tools and pneumatic equipment This is the same air water separator we install on the Big Slinger Soft Wash system as well. It helps to prevent the water and moisture getting into your pump.  With the automatic float valve, it's not uncommon to see water shoot out of the drain hole at the bottom.  This means the Tsunami is doing it's job. I have an awesome Online Pressure Washing School that is perfect if you are just starting a pressure washing business.  You can also get some great tips at my You Tube Channel. If you have any questions about our products please use the CONTACT FORM