Savings. Shopping.Get Checkmate
The JumpSmart 10-in-1 is a user-friendly multi-tool that includes a powerful 8,000 mAh 4-cell battery that powers a vehicle jump starter, 4-mode flashlight with an emergency red flashing light, 2-port USB power bank, and an audible safety alarm. Additional useful features include a compass, thermometer, reflector, and carrying strap. Its IP65 water/dust resistant rating makes it safe for use in the elements. JumpSmart is powerful enough to jump start most cars, trucks, SUVs, boats, motorcycles, lawn mowers, ATVs, and more!IncludesOne (1) JumpSmart Vehicle Jump Starter & 10-in-1 Multi-Tool in color of your choiceOne (1) set of Smart Jumper Cables with mini flashlightOne (1) carrying bag with printed instructionsOne (1) USB wall chargerOne (1) USB car chargerOne (1) micro USB cableUser manualFeatures10-in-1 multi-tool that includes:Jump starter:Powerful enough to jump start up to V8, 7.0 L (4.0 L diesel) cars, trucks, SUVs, boats, motorcycles, lawn mowers, ATVs, and moreInstantly jump a drained vehicle battery by clamping the Smart Jumper Cables directly onto the vehicle battery terminals8000 mAh high-grade Lithium-Polymer battery with DC 12V 200A (start)–800A (peak)Power bank: Dual USB ports provide optional charge, up to 2.4 amps per port, for fast charging for USB-chargeable devicesLED flashlight:8W, 330 lumenFour modes: High Beam, Low Beam, S.O.S., Strobe495 ft reachEmergency red flashing lightAudible safety alarmThermometerCompassReflectorCarrying strapIP65 water/dust resistant ratingHas 10 built-in safety checks with audible alarms and visual safety indicator lights to warn of an improper connectionLightweight and portableUser-friendlyRubberized knurled gripIdeal for daily use, traveling, outdoor activities, and in emergency situationsCharging time: approx. 3–4 hoursMade of PC + ABS plastics / TPUMeasures 10” x 2.5” x 2.5”Weighs 1.14 lbsHow to UseTo prevent potential product damage, property damage, personal injury, or even loss of life, read all Safety Warnings located in the “Safety Information” section of the User Manual before attempting to operate the JumpSmart and its accessoriesCharging the JumpSmart:It is recommended to recharge the JumpSmart after each use for optimal performance. The JumpSmart should be recharged every three months regardless of usage amountRemove the end cap from the back panel of the JumpSmart. Plug the micro USB cable into the micro input on the back panelIf using the USB wall charger:Plug the USB wall charger into a standard 110V AC wall outletPlug the opposite end of the micro USB cable into the USB port of the wall chargerIf using the USB car charger:Plug the USB car charger into a standard 12V vehicle power socketPlug the opposite end of the micro USB cable into the USB port of the car chargerUsing the jump starter:Plug the Smart Cable box into the jump starter port located on the back panel of the JumpSmartOnce plugged in correctly, the green and red safety indicator lights will flash in an alternating pattern on the Smart Cable box. The Smart Cables can now be connected to the battery terminalsTip: Use the Smart Cable mini flashlight located on the end of the Smart Cable box to shine light on the battery terminalsConnect the red clamp of the Smart Cables to the positive terminal of the vehicle batteryConnect the black clamp of the Smart Cables to the negative terminal of the vehicle’s battery. Once both the positive and negative clamps are properly connected, the green safety indicator light on the Smart Cable will remain illuminated. The vehicle is now ready to be startedOnce the vehicle has been successfully started, proceed to remove the jumper cables in the reverse order that they were attached, beginning with the black jumper cableIf the vehicle does not start after the first attempt, disconnect the Smart Cables from the JumpSmart and wait at least 60 seconds before repeating steps 1–4Do not attempt to jump start a vehicle more than three times. If the vehicle battery does not start after the third try, consult a certified mechanicUsing the flashlight:Single click the power button to turn on. It will be in High ModeSingle click the power button to scan through the flashlight modesTo turn off without scanning through the modes, press and hold the power button for approx. 3 secondsTo use the red flashing light: Press and hold the power button for approx. 3 seconds to turn the red flashing light on. Press and hold the power button again to turn the red flashing light offUsing the power bank:Remove the end cap from the back panel of the JumpSmart. Plug a USB cable into one of the USB charging ports (output)The Battery Capacity indicator lights will illuminate if properly connected and ready to usePlug the opposite end of the USB cable into a mobile device. The device will begin to chargeUsing the audible safety alarm: Remove the end cap from the back panel of the JumpSmart. Press the S.O.S. power button to activate the alarm. Press the S.O.S. power button again to deactivate the alarmUsing the compass:With the end cap attached, hold the JumpSmart in a vertical position directly in the front and center of your body, or stand the JumpSmart on a flat surface for a more accurate readingThe compass will adjust to point to the magnetic north and display the current directionUsing the thermometer: It will automatically indicate the current temperature. For an accurate reading, place the JumpSmart out of direct sunlight and wait approx. 5 minutes for the thermometer to acclimateCare InstructionsStore the JumpStart in a cool, dry placeBatteries are affected by temperature. The ideal storage temperature is 70° F (21° C)Note: If the JumpSmart is exposed to extreme temperatures (-4° F, 140° F+ / -20° C, 60° C+), it is recommended to allow the JumpSmart to reacclimate to the ideal temperature of 70° F before usingFAQsFlashlight:What features does the flashlight have?The flashlight features four different light modes, plus a red flashing light. The modes included: High-Beam, Low-Beam, S.O.S, Strobe, and Red FlashingHow do you turn the flashlight on?To use the flashlight, single click the power button. To click through the flashlight modes, continue to single click the power button. If you do not want to click through the modes, press and hold the power button for 1–2 seconds until the flashlight turns offHow do you turn the red flashing light on?To use the red flashing light, press and hold the power button for 1–2 seconds until the red flashing light powers on. To turn the red flashing light off, single click the power buttonJump starting:Can you use the JumpSmart outdoors?Yes, the JumpSmart is designed for use outsidePlease note: The JumpSmart should always be charged indoors or inside your vehicleWhat kind of vehicles can I jump start with the JumpSmart?The JumpSmart can jump start cars, trucks, boats, lawn mowers, motorcycles, ATVs, and more that have engines that size from 4, 6, and 8-cylinder engines below 7.0L Gas and 4.0L DieselWill the JumpSmart be able to jump start my very dead battery?The Jump Smart will be able to jump most batteries up to 8-cylinder, 7.0L Gas and 4.0L Diesel. The JumpSmart does not recharge a dead battery, but instead provides the power to start the vehicleCan this jump start a diesel car?The JumpSmart can jump up to a 4.0L diesel engine with easeCan I use the JumpSmart to jump start my Hybrid?The JumpSmart can jump start most vehicles with engines below V8, 7.0 liters. Please refer to your vehicles owner’s manual or consult a mechanic if you have additional questions about what size engine you haveWhat is the peak and cold cranking amps of the JumpSmart?The JumpSmart can provide a peak current of 800 ampsIs the JumpSmart safe to use?The JumpSmart has been 3rd party tested to ensure quality and safetyCan I use the JumpSmart to jump start a vehicle by myself?Yes, the JumpSmart is designed to be operated with just one person. Please refer to the instructions in the User Manual or on the Carrying Case to jump start a vehicleWhat is the voltage?The JumpSmart has a 12V outputCharging the JumpSmart:How do you charge the JumpSmart?The JumpSmart can be charged at home or in the car using the included wall and vehicle charging adapters and Micro USB CableCan I over-charge the JumpSmart?No. There are safety features built into the JumpSmart that prevent the battery from over-chargingIs the JumpSmart reusable?Yes, the JumpSmart has a rechargeable battery and can be charged using the included vehicle or wall chargersHow often do you have to charge it?We recommend recharging the JumpSmart every 3 months whether it has been used or not. This will ensure that the JumpSmart is always fully charged in case of an emergencyHow long does it take to charge?The JumpSmart takes approximately 4 hours to charge from a fully drained battery. The JumpSmart will ship about 75% charged for your convenienceHow many times can the JumpSmart be recharged?The JumpSmart can be recharged approximately 1000 times. From there, the battery will decay approximately 30%Can you charge the JumpSmart in the car while you are driving?Yes, you can charge the JumpSmart while driving. It will virtually take the same amount of time to charge at home vs. in the car — about 4 hours from a completely drained batteryHow long will the JumpSmart hold its charge if not in use?The environment the JumpSmart is stored it may affect the life of the charge. We recommend recharging the JumpSmart every three months so that it is charged when you need itHow do I know how much battery is left?There are four lights above the power button that are representative of the percentage of charge remaining on the JumpSmart. 4 lights = 100% charged. 1 light = 25% or below battery remainingPower Bank:Does the JumpSmart have Android Type-C charging capability?The JumpSmart does not have a Type-C USB port, but a USB-A to USB-C cable can be plugged in to charge at a standard rate of up to 2.4 ampsDoes the JumpSmart have Apple-Device charging capability?Yes, the JumpSmart is able to charge an Apple device using one of the USB Charging PortsCan I charge my laptop with the JumpSmart?The JumpSmart includes a USB charging port for USB-chargeable devices, but the JumpSmart cannot charge a laptopWhat is the amp charge?The JumpSmart has 2 USB ports with a 2.4A total output. When using both USB Ports (Output), the power will be shared between both portsHow long does the JumpSmart take to charge my phone?Charging times vary depending upon the device, the age of the device and the level of current powerGeneral:How do I use the S.O.S. Alarm?It takes only one press to activate and de-activate the S.O.S. AlarmCan the JumpSmart be used outdoor?Yes, the JumpSmart is designed for use outside and is rated IP65 certifying that it is dust tight and water resistantCan I take the JumpSmart on an airplane?You should always refer to the airline carrier prior to flyer, but if you bring the JumpSmart with you while traveling it MUST be carried on with you, not checked with your baggageWhat is the safe storage temperature range?The ideal storage temperature for the JumpSmart is between 32°F to 104°FWhat is the safe operating temperature range?The JumpSmart can be stored and operated in temperatures ranging from 32°F to 104°F. If the JumpSmart is exposed to extreme temperatures (-4°F–140°F / -20°C–60°C), it is recommended to allow the JumpSmart to re-acclimate to the ideal temperatures before usingIs there a warranty?Every JumpSmart comes with a 1-Year Limited WarrantyWhat does mWh mean?Milli Watt HoursDoes the JumpSmart have serviceable parts?No, the JumpSmart does not have serviceable parts and the Lithium Polymer battery cannot be replaced
Save on JumpSmart Vehicle Jump Starter & 10-in-1 Multi-Tool with a 40 Boxes discount code
Checkmate is a savings app with over one million users that have saved $$$ on brands like 40 Boxes.
The Checkmate extension automatically applies 40 Boxes discount codes, 40 Boxes coupons and more to give you discounts on products like JumpSmart Vehicle Jump Starter & 10-in-1 Multi-Tool.
Checkmate users have also been loving these products from 40 Boxes.
Users have been saving products like this to their collections.
