Land Rover Range Rover Sport L320 Slimline II Roof Rack Kit - by Front Runner Outfitters
This 1560mm/61.4" long, full-size, Slimline II cargo carrying roof rack kit for the Land Rover Range Rover Sport L320 contains the Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
NOTE: Cali Raised LED 42" Lightbars are offered in case you'd like to pair your Slimline II with an amazing and solid lightbar. Make sure to select yours when choosing the product's variants.
*** Cali Raised Lightbars will include the specific Front Runner Brackets, hence its price will be higher (+$59.99) than the links below ***
In case you'd like to have a full description of the lightbars, here they are:
Cali Raised LED 42" Slim Single Row LED Lightbar. Click HERE
Cali Raised LED 42" Slim Single Row LED Lightbar (Amber). Click HERE
You can also pair your Slimline II with a 40" Front Runner Lightbar:
Front Runner 40" LED FX1000-CB Single Mount. Click HERE
NOTE / this rack will work only on the Land Rover Range Rover Sport L320 from 2005 to 2013.
Also, installation is a bit different than the rest of the Slimline II racks, please take a look below at the installation guide to make sure you'd like to get this rack for your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
We offer FREE SHIPPING!
Consisting Of:
2 x FASS012 - Foot Set / 40mm - 50mm
1 x FASS015 - Foot Set Angled / 75mm
1 x RRSTG08 - SLII Tray - 1345mm (W) x 1560mm (L)
1 x TRBU004 - Pick Up Load Bed Tracks / 1600mm (L)
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm (W)
Materials Used:
Black epoxy powder-coated T6 aluminum
High Strength Steel
Additional Information:
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1730mm (68")
Height: 270mm (11")
Shipping Weight: Weight 33.4kg (73lbs)
Install Guide, click HERE or read below.
Land Rover Range Rover Sport L320 (2005-2013) Slimline II Roof Rack
*THIS KIT USES UNIVERSAL COMPONENTS WHICH REQUIRE MODIFICATION TO WORK WITH THE FACTORY MOUNTING POINTS IN YOUR VEHICLE’S ROOF. IF THE WORK IS NOT COMPLETED BY FRONT RUNNER OR ONE OF THEIR DEALERS, THE DIY CUSTOMER ASSUMES LIABILITY FOR THE RACK SYSTEM AND THE SAFETY OF ITS INSTALLATION*
Components:
1 x RRSTG08 | SLIMLINE II TRAY - 1345MM(W) X 1560MM(L)
2 x FASS012 | FOOT SET / 40MM-50MM
1 x FASS015 | FOOT SET ANGLED / 75MM
1 x TRBU004 | PICKUP LOAD BED TRACKS / 1600MM(L)
1 x WDST009 | WIND DEFLECTOR 20MM LIP WIDE PAIR / 1345MM(W)
Procedure:
1. Remove three plastic fasters from ditch molding on both sides. Try unscrewing them so the barbed plastic does not break off in the nut. If this happens, extract the plastic without damaging the threads.
2. Mark in the center of the TBRU004 track from front to back at 221mm, 800mm, and 1357.5mm. Align the 800mm mark with the center mounting point on the roof and ensure the other two marks line up with the front and rear.
3. Determine where to make small bends in the rail to form it to the roof. Working from the center of the track forward and back, bend the track by placing it on a hard table with plywood underneath and hitting it with a dead blow hammer. More frequent small bends will look/fit better than a few large bends. When you get to the front and back end, 'over-bend' the track slightly to create a little pre-load. This keeps the tip of the track pressed to the roof since the factory mounting point is farther away from the end.
4. Place three of the clamp plates that came with the tracks on the factory roof trim. This acts as a spacer between the factory mounting point and the track. Lay out the protective rubber under the track and secure the track to the roof using M6 x 25mm countersunk bolts. You may have to cut your bolts down or source them yourself as this is a DIY kit with universal parts.
5. Assemble rack tray with low-pro wind deflector WDST009 underneath front slat.
6. Locate top half of feet on rack (40-50mm feet on 1st & 5th slat, 75 angled foot on 8th slat).
7. Locate bottom half of feet on tracks, measure their distances out to match and secure.
8. Place
Save on Front Runner Slimline II Roof Rack For Land Rover Range Rover Sport L320 (2005 - 2013) with a Off Road Tents promo code