HappyModel has been an amazing company, bringing us FPV enthusiast quality whoops to fly. Take a look at HappyModels first ever whoop on a 85mm frame. It comes with X12 series flight controller, EX1103 KV11000 motors and Gemfan Hurricane 2023 tri-blade propellers, all together gives this whoop an amazing performance for an extremely smooth flight.  Choose between PNP (No RX) and BNF (ELRS SPI 2.4) Be sure to check out all our pre-built quads, and all our Happymodel products! Features X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX VTX Power up to 400mw ELRS V2.0 (Default), can be flashed to ELRS V3.0 EX1103 KV110000 motors CaddxFPV Ant FPV camera Smooth and powerful Compatible for 1S-2S Lipo/LIHV battery 3D Printed Camera Lens Protector User Manuals ELRS (SPI) PNP (No RX) Specifications  Brand Name: Happymodel Motor: EX1103 KV11000 AIO: X12 5-IN-1 AIO flight controller Camera: CaddxFPV Ant FPV camera Prop: Genfan 2023-3 propellers  Weight: 42.7g Input Voltage: 1-2S Wheelbase: 85mm Size: 120mmx120mmx50mm Motor Specifications  Model: EX1103 KV11000 Configuration: 9N12P Stator Diamter: 11mm Stator Length: 3mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.xLen): Φ13.5mmx15.5mm Weight(g): 3.8g No.of Cells(Lipo): 1-2S Propeller Specifications Weight: 0.88g Material: PC Pitch: 2.3inch Props Dia: 52.17mm Center Thickness: 5mm Center Hole Dia: 1.5mm Flight Controller Specifications MCU: STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM20689 or ICM42688P(SPI connection) Mount hole size: 25.5mm x 25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A Built-in voltage detection Built-in current sensor Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Firmware target: Z_H_30 Default protocol: DSHOT300 Support Bluejay firmware Onboard SPI ELRS 2.4GHz Specifications  Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol:  SPI ExpressLRS Could flash FC firmware to support ExpressLRS v3.0 TX module PNP Version Specifications  Full UART1 for external Receiver Support CRSF/GHOST/SBUS/IBUS/DSMX protocol IR1 pad(invert RX1) used for SBUS input Includes 1x HappyModel BNF Mobula8 1-2S Brushless Analog Whoop - Choose Your Receiver 1x Gemfan Hurricane 2023 tri-blade propellers (4CW+4CCW) 1x Screw Driver 1x Extra camera canopy