Features Smooth, glossy color finish for a sleek appearance Made from high-performance, durable TPU material Self-adhesive film with strong, acrylic-based adhesive Heat-activated self-healing topcoat to repair minor scratches Hydrophobic surface that resists UV rays, stains, and corrosion Scratch-resistant and anti-corrosion for long-term surface protection Suitable for dry application, offering a cleaner, more efficient installation process Equipped with air-release channels for bubble-free results Easy to apply, slide, reposition, and maintain  Specifications Application Method: Dry Application. Color: Royal Green. Finish: Glossy Metallic. Sizes available: 5ft x 3.28ft, 10ft, 16ft, 33ft, and 49ft. Packaging: Roll.  Things You Should Know Best Paint Protection Film (PPF) How To Apply Paint Protection Film  PPF Vs Vinyl Wrap How Long Does Paint Protection Film Last? How Much Does  Paint Protection Film Cost? Video Structure Functions Recommended Uses ▲ Standard Size & Appearance Classification Unit Specs Remarks Thickness Top protected film um 50±5% PET Self-healing Layer um 10±5% / Face Film um 60±3 Thermoplastic Polyurethane Color Layer μm 17±0.5 / Base Color Layer μm 70±0.5 Termoplastic Polyurethane Acrylic Adhesive um 35±2 Solvent-based Release liner um 75±5% Satin Semi-transparent White Width m 1.52±1% 4.98ft Length m 15±1% 49.21ft   Physical properties  ▲ General Properties Features Test Method/Conditions Data Gloss（60°） GB 8807 ≥90 Water Contact Angle DL/T864 Appendix A ≥90° Hardness GB/T 6739 ≥85A Elongation at Break GB/ T1040 ≥350% Coating Elongation at Break GB/ T1040 ≥85% Tensile Strength GB/ T1040 ≥18 (mpa) Initial Adhesion FTM 9 ≥ 8N/25mm 24h 180° Peel Force GB/T 2792 ≥ 12N/25mm Storage Aging Peel Force GB/T 2792 ≥ 10N/25mm Application Aging Peel Force GB/T 2792 ≥ 16N/25mm Peel Force GB/T 2792 ≤ 0.3N/25mm Dimensional Stability (MD) FTM 14 ≤ 0.5mm Dimensional Stability (CD) FTM 14 ≤ 0.4mm Scratch Repair (0.1mm) Copper brush&Heat gun Repair Time≤ 3minutes Stain Resistance GB/T 16422.2 No visible water stain deposits Hydrolysis Resistance QC/T 1171-2021 stable for over 200h Acid & Alkali Resistance Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h No visual coating defects Yellowing ΔE QUV Method 2000h ≤2 Application Termperature / +20℃ to +30℃ ServiceTemperature / -50℃ to +110℃ Recommended Shelf Life 15-25°C or 59-77° F and 45-50% Humidity 2 years Installation Conditions & Guidelines To ensure optimal performance and long-lasting protection, please follow the installation instructions and environmental conditions below: Recommended Installation Environment: Room Temperature: 25 ± 3°C Humidity: 50 ± 5% RH Cleanliness: Clean, dust-free environment with no visible airborne particles Installation Instructions: Inspect the installation area for any conditions that may negatively affect the process. Resolve any defects or issues before proceeding. Thoroughly clean the vehicle's painted surface to remove contaminants such as mildew, oil, grease, stains, or other residues. Cut the film to the appropriate size. Do not remove the protective liner until just before application. Eliminate all bubbles, wrinkles, lifting edges, and other surface defects during installation. If the installed film fails to meet the required standards, remove and replace it with a new piece. Clean surrounding and adjacent surfaces to remove any excess installation solution. For one week after installation, avoid washing the vehicle or exposing it to rain to allow the adhesive to fully bond with the paint surface for maximum adhesion. Recommendations Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquidApplication method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.Aftercare: PH neutral. Avoid wax or solvents. CAUTION!  1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.   2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.