Savings. Shopping.

Get Checkmate

Shop at Paris Lash Academy

Paris Lash Academy Halo Adhesive

$35

25 coupons

PLA Halo Adhesive is a master lash artist’s favorite glue! It’s PLA’s first clear adhesive and has been tested in multiple humidities and worked great for all lash artists. Halo is one of our best adhesives for low humidity. It’s also a great option if you need a fast drying adhesive. Halo is a great option for you if: You have low humidity (works well in a wide range) You have clients with sensitivity to Carbon Black You want fast drying Fast Facts: Clear Adhesive 5 Ml bottle Strength: Approximately 3 to 5 weeks Viscosity: Medium Drying Time: 0.5-1 seconds, one of our fastest adhesives! Humidity: 20%-45% humidity is ideal Color: Clear Oil and water resistant. Bottles are pre-punctured. All PLA Adhesives are cruelty free and never tested on animals. Not sure which adhesive to try? Please take the PLA Adhesive Quiz to be matched to the right adhesive for you. Our glue quiz asks you key questions about your environment to match a glue for you. Suggested Environment Temperature: 68-74 degrees Fahrenheit Under 50% Humidity: 1 second cure time 50%-75% Humidity: 0.5 second cure time Over 75% Humidity: please use a dehumidifier Note: the higher your humidity, the faster your adhesive cures. Ingredients: Ethyl-2-Cyanoacrylate, PMMA, Isobutylene/Isoprene Copolymer No Animal Ingredients 100% Vegan Cruelty-Free Latex Free Storage: Please store in cool, dark container or in our adhesive container with silica gel, out of UV light. Unopened adhesive is good for 6 months. Once opened, adhesive is good for 4 to 6 weeks. Shake for two minutes before using. Many clients that have an allergy to Carbon Black find that an adhesive like Halo is similar to a hypoallergenic glue and they do not have reactions to it. If your client is allergic to cyanoacrylate, this adhesive will not work for them. For more information on choosing an adhesive, please watch this video. Warning: this product is intended for professional use only. Do not use this adhesive for self application or to apply cluster or strip lashes. Liquid products, including adhesive, cannot be returned. If you are unhappy with your adhesive contact our customer service via email at sales@plapro.com. MSDS MSDS |MATERIAL SAFETY DATA SHEET Section 1 – Chemical Product and Company Identification MSDS NAME PARIS LASH ACADEMY HALO COMPANY ADDRESS 825 Maestro Drive Reno, NV 89521, USA Tel:775-440-1208 FOR EYELASH EXTENSIONS ONLY Section 2 – Composition and Ingredient Information Ingredient Component Name Ethyl-2-Cyanoacrylate CAS Number 7085-0 Concentration 90% Isobutylene/Isoprene Copolymer CAS Number 9010-85-9 Concentration 4% PMMA CAS Number 9011-14-7 Concentration 5% Section 3 – Hazards Identification Hazard Risk Classification Category 1 Potential Health Effect Eye: Irritating to eyes. Causes excessive tearing. Eyelids may bond. Skin: Bonds skin in seconds. May cause skin irritation. Cyanoacrylate has been reported to cause allergic reaction but due to rapid polymerization at the skin surface, an allergic response is rare. Cyanoacrylates generate heat on solidification. In rare circumstances a large drop will burn the skin. Cured adhesive does not present a health hazard even if bonded to the skin. Inhalation: Exposure to vapours above the established exposure limit result in respiratory irritation which may lead to difficulty in breathing and tightness in the chest WARNING: MAY CAUSE EYE AND RESPIRATORY IRRITATION BONDS SKIN IN SECONDS. Section 4 – First Aid Measures Inhalation Remove to open space with fresh air. Seek medical attention to treat symptomatically if discomfort persist Eye Contact Flush with water for at least 15 minutes. Get medical attention. If eyelids are bonded closed, release eyelashes with warm water by covering with a wet pad. Do not force eye open. Cyanoacrylate will bond to eye p\protein and will cause a lachrymatory effect which will help to deboned. Skin Contact Soak in warm soapy water. Gently peel apart using a dull instrument. If skin is burned due to the rapid generation of heat by a large drop, seek medical attention. If lips are bonded, apply warm water to the lips and encourage wetting and pressure from saliva in mouth. Peel or roll lips apart. Do not pull lips apart with direct opposing force. Ingestion Ingestion is not likely. See supplemental page for emergency procedures. Section 5 – Fire Fighting Measures Specific Hazard N/A Flash Point 125℃ Tagliabue closed cup Auto Ignition temperature 485℃ Flammable/Explosive Limits-lower% Not determined Flammable/Explosive Limits-upper% Not determined Hazardous Decomposition Materials Carbon Monoxide, Carbon Dioxide Suitable Extinguishing Media Dry powder. Foam and Water spray. Carbon dioxides Protective Equipment Fire fighters should wear positive pressure self-contained breathing apparatus Hazardous combustion products Trace amount of toxic and or irritating fumes may be released and the use of breathing apparatus is recommended. Unusual fire or explosion hazard None Section 6 – Accidental Release Measures Environmental precautions Ventilate Area Disposal and Clean Up Do not use cloths for mopping up. Flood with water to complete polymerization and scrape off the floor. Cured material can be disposed of as non-hazardous waste Section 7 – Handling and Storage Handling Precautions Avoid contact with eyes, skin, and clothing. Avoid breathing of vapors Storage Keep in a cool, well ventilated area away from heat Section 8 – Exposure Controls and Personal Protection Engineering Controls Use positive down-draft exhaust ventilation if general ventilation is insufficient to maintain vapor concentration below established exposure limits. Respiratory Protection Use NIOSH approved respirator if there is potential to exceed exposure limits. Observe OSHA regulations for respiratory use (29 CFR 1910.134) Skin Protection Use gloves and aprons as necessary to prevent contact. Do not use PVC, nylon or cotton. Eye/Face protection Chemical splash goggles or safety glasses with side shields. Section 9 – Physical and Chemical Properties Physical State Colorless Liquid Odor Sharp, irritation pH N/A Boiling Point More than 300OF Flash Point 125℃ Tagliabue closed cup Flammability 1 Evaporation Rate (Ether=1) N/A Ignition Temperature 485℃ Melting/Freezing Point N/A Solubility Polymerized by water Vapour Density Approximately 3 Vapour Pressure Less than 0.2mm Section 10 – Stability and Reactivity Stability Stable under recommended storage conditions Conditions to Avoid Spontaneous polymerization Incompatible Materials Water, amines, alkalis and alcohols Hazardous Rapid exothermic polymerization will occur in the presence of water, amines and alcohol Hazardous decomposition None Section 11– Toxicological Information Product toxicity data: Acute oral LD50〉5000mg/kg(rat) Acute dermal LD50〉2000mg/kg(rabbit) Carcinogen status Hazardous component NTP Carcinogen IARC Carcinogen OSHA Ethyl Cyanoacrylate 7058-85-0 NO NO NO Carbon Black 1333-86-4 NO Group 2B Yes Literature Referenced Target Organ & Other Health Effects Health Effects Hazardous Health Effects/Target Organs Ethyl Cyanoacrylate Allergen, Irritant, Respiratory Carbon Black Respiratory, Some evidence of carcinogenicity Section 12– Ecological Information Ecotoxicity No data available Persistence/Degradability No data available Bio accumulative Potential No data available Mobility in Soil No data available Section 13– Disposal Consideration Information provided is for unused product only. Recommended method of disposal in accordance with Federal, State and local regulation Not a RCRA hazardous waste Section 14– Transport INTERNATIONAL AIR RANSPORT ASSOCIATION (IATA): This product is not classified as dangerous goods, by rules of IATA. U.S Department of transportation (DOT) Shipping regulations: This product is not classified as dangerous goods, per U.S. DOT regulation under 49CFR 172.101. Proper shipping name: Volume X Hazard Class number and description: Not applicable. UN identification number: Not applicable. Packing group: Not applicable. Section 15– Regulatory Information Cyanoacrylate Korean regulation Industrial Safety and Health: Hazardous Chemical management. Dangerous Material Safety management. United State Regulatory Information TSCA 8 (b) Inventory Status: All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory TSCA 12(b) Export Notification: None CERCLA/SARA Section 302 EHS: None CERCLA/SARA Section 311/312: Immediate Health Hazard, Delayed Health Hazard, Fire. Reactive CERCLA/SARA 313: None California Proposition 65: No California Proposition 65 listed chemical are known to be present Canada Regulatory Information All components are listed on or are exempt from listing on the Domestic Substances List WHMIS Hazard class: B.3, D.2.B Section 16– Other Information DISCLAIMIMER: All the information of Material Safety Data Sheet is provided on the basis in good faith and is believed to be trustworthy but is for reference only. Adhesive is very complicated and the result of it is much dependent on the surface material, additive, releasing agents of the substrates and user's methods. BTC and its agents, dealers, distributors, directors and employees do not accept any liability for the results whatsoever arising from the use of BTC products due that the utilization of these products is simply out of BTC control. The users are responsible for selecting the suitability of the products and methods of use. SUBSCRIPTION Canceling a Subscription: To cancel your subscription, please contact us at sales@plapro.com with a minimum of 24 hours notice prior to your next billing date. This will allow us to process your cancellation request asap and ensure that it is applied to the next billing cycle.Please note that canceling a subscription does not cancel an order that has already been confirmed or stop a pending charge. If you have any questions or concerns about your subscription, please reach out to us at sales@plapro.com. Updating Shipping Addresses: To update the shipping address for a future subscription shipment, please contact us at sales@plapro.com with a minimum of 24 hours notice before your next billing date. This will give us enough time to process your request and ensure that your order is delivered to the correct address.Please note that subscription orders that have already been confirmed with an order number cannot be edited. If you have any questions or concerns about updating your shipping address, please reach out to us at sales@plapro.com. Updating Payment Methods: To update the payment method for your subscription, please email us at sales@plapro.com. We will provide you with a secure link to update your payment information.Please note that subscription orders that have already been confirmed with an order number cannot have payment changes. If you have any questions or concerns about updating your payment method, our customer service team is available to assist you. Subscription Return Policy: Due to the nature of our adhesives, we are unable to accept returns or exchanges. However, if you are not satisfied with your adhesive, please contact us at sales@plapro.com.

Save on Halo Adhesive with a Paris Lash Academy coupon

Name: Halo Adhesive
Price: 35 USD
Availability: InStock

Checkmate is a savings app with over one million users that have saved $$$ on brands like Paris Lash Academy.

The Checkmate extension automatically applies Paris Lash Academy discount codes, Paris Lash Academy coupons and more to give you discounts on products like Halo Adhesive.

Checkmate users have also been loving these products from Paris Lash Academy.