X Factor Complete Wash Bay System:
PORTABLE GAS POWER - FREEDOM FOAMER KIT
This is the ultimate solution to streamline both shop space and wash time! The X Factor Portable Power Washer combined with our Freedom Foamer Kit make for an incredible system that will cut wash time down by as much as 90 percent.
Take your washing and detailing to the extreme!
Mission Ready Ultimate Touch Free Vehicle Wash Kit INCLUDES
X Factor Portable Gas Power Washer
Suttner ST-164 Dual Foam Injector
Freedom Foamer Lance
1 Soap Nozzle + 0°/15°/25°/40° Nozzles
2 Gallons Stars / 2 Gallons Stripes
100' High Pressure Hose rated for 6000psi
Tactical Strike Touch Free Vehicle Wash Kit INCLUDES
X Factor Portable Gas Power Washer
Freedom Foamer Lance
Suttner ST-160 Foam Injector
1 Gallon Old Glory
100' High Pressure Hose rated for 6000psi
1 Soap Nozzle + 0°/15°/25°/40° Nozzles
THE X FACTOR
PORTABLE GAS POWER WASHER
Pump + Plumbing Layout
These power washers feature a Commercial Duty Triplex Plunger Pump which is rated for an inlet water temperature of 140 degrees, along with our own unique plumbing layout designed for easy serviceability.
The VRT3 Unloader Valve (pressure actuated for foaming systems) is mounted with a 3/8 screw coupler to drastically reduce repair times, this layout also has minimal 90 degree fittings which helps to increase output PSI. The garden hose inlet is a General Pump DuraView Filter to remove any particulates from the water line and can be visibly checked without opening.
Engine
With the GX390, you’re looking at one of the best engines in the business. Powerful, Reliable, Durable, and Quiet. Honda’s GX Series is power you can trust, and then some.
THE FREEDOM FOAMER
THIS IS UNLIKE ANY OTHER POWER WASHER INTERFACE
The Chem-X Freedom Foamer was designed and hand built by Chem-X. We took the very best components and pieced them together in a layout with pure functionality and durability in mind. An almost fully stainless lance that is built to hold up in harsh environments. With this lance you can change between foam and rinse directly at the gun. The MTM Hydro Mezzo Shuttle Valve allows selection of either rinse or foam with the push of a button. By far the best foam lance on the market!
RAIL MOUNTED RECHARGEABLE TACTICAL FLASHLIGHT
Even in the most well-lit wash bays, there is never enough light. With this one-of-a-kind solution, you will never wonder again if you did, in fact, clean your wheel wells thoroughly. Engine bays, undercarriages, and trailer washouts will never be the same.
The OLIGHT Odin Rail Mounted Rechargeable Tactical Flashlight has been load tested in our studio for the last two years without a single failure, living up to our goals of offering durable solutions that are helpful.
MTM Hydro SGS35 TRIGGER
Our favorite trigger option here at Chem-X, the SGS35 features a stainless steel live swivel to maximize efficiency while working. The added fully stainless KEW outlet allows different lance and nozzle attachments and allows rotation under high psi while not sacrificing durability at this junction like conventional QC fittings.
MEZZO VALVE
The MTM Hydro Mezzo Shuttle Valve allows quick easy and durable selection between rinse and foaming functions. The valve allows complete changeover from the high psi rinse nozzle to the slightly lower psi foam nozzle, allowing the remote venturi injection at the ST-164 Injector to draw from your soap containers back at the power washer. This process eliminates refills entirely as well as the need to connect and disconnect foam cannons and rinse nozzles as would normally be the case.
SILENCER MODE
Ideal for small projects or car detailing, this layout allows lightweight one-handed operation and a backup foam or rinse option if the full-length lance were to clog or malfunction while soaping or rinsing a vehicle.
HIGH END FITTINGS
The Veloci Prima QC line is produced from 303 stainless steel sourced from the City of Steel, Pittsburgh, PA. It is machined to be three times more precise than standard QC fittings, resulting in a longer lifespan and a much higher quality feel. These QC fittings feature the smoothest action in the power washer industry, along with EPDM seals for high temperature and chemical tolerance.
SUTTNER ST-164 DUAL FOAMING CHEMICAL INJECTOR
The most efficient and durable foam injector available, with a dilution range from 12:1 to 200:1. The easiest way to select between two chemicals and rinse. Simply switch the lever on the top of the injector to the desired position(chem 1 or chem 2) and let the soap fly.
This injector also features a full port bypass, which allows full output from the power washer as well as the ability to rinse while in foaming mode, reducing impact for gentle applications like floor mat rinsing.
Metering tips control the soap's draw rate. The dosing nozzles have a pin-sized hole through which the soap is drawn; the size of this hole determines your soap-to-water ratio. We install the 0.7 ratio tips for automatic 100 parts water to 1 part soap, or 1% strength, when it arrives to you so that you can get to work without having to think about how the system is set. If you prefer to save costs, these injectors include a 200:1 ratio tip, which would cut soap costs in half per wash, or stronger tips if you find you need to use a more powerful solution in your situation. The dosing nozzles offer a dilution range from 12:1 to 200:1.
STARS AND STRIPES TOUCH FREE WASH
When Stars+Stripes mix on the vehicle surface, a resulting pH shock will activate the cleaning reaction. This dual stage process breaks the static bond of dirt and road film from the surface, allowing the high psi rinse to remove more grime than any single stage application and also results in a neutral pH. This process saves the user up to 80% of the time it would normally take to do a mitt wash. Using two soaps also lets us tackle more grime by allowing us to use a wider range of surfactants that help with many different types of grime.
-
SPECS
PUMP
4.0GPM@4000PSI
Commercial Duty Triplex Plunger Pump (Rated for water inlet temperature of 140 degrees max)
Oil Bath Crank Case
Stainless Valves
Brass Manifold
Direct Drive
Thermo Pump Protector
ENGINE
Honda GX390
Air-Cooled 4-Stroke OHV
11.7 hp (8.7 kW) @ 3,600 rpm
Digital CDI w/Variable Timing Ignition System
Recoil Starting System
Fuel Tank = 6.4 U.S. qts (6.1 liters)
Dry weight = 69lbs
FRAME
One piece Bent Steel Base
All Powder Coated
Portable Design
3/4" Threaded Axles
(2)13″ Foam Filled Tires Attached with Lock Nuts
*Shipping
X Factors are stocked at Chem-X and are tested and prepared for shipping via freight in 3-7 business days from the point of order.
Once order is placed we will reach out to finalize shipping details.
X Factors are built in North America.
Save on X Factor Portable Gas Power Washer - Freedom Foamer Touch Free Kit 4GPM @ 4,000PSI with a Chem-X discount code