Savings. Shopping.Get Checkmate
How to install the bike rack?
1. Clean up the car roof and the suction cups with a clean and wet towel.2. Install front fork holders, then put the rack on the chosen location, press the suction cup vertically against the car roof with one hand while the other hand pushes the cylinder rod to extract the air until the white line is in the pump.3. Remove the bike front wheel then lock the front fork on the roof rack.4. Install the rear suction cup, then fix the rear wheel and the crank with hook and loop straps.
ROCKBROS Bike Carrier for 1 Bike / 2 Bikes / 3 Bikes
Color
Red/Black
Color
Red/Black
Color
Red/Black
Capacity
For 1 bike
Capacity
For 2 bikes
Capacity
For 3 bikes
Length
approx. 47 cm
Length
approx. 82 cm
Length
approx. 92 cm
Weight
approx. 2.1kg
Weight
approx. 3.4kg
Weight
approx. 4.5kg
How to choose installation location?
The selected installation location must be flat and smooth. Do not install it on the advertising area or other seam.
Please hold the handlebar forward when attaching the bike to the roof rack.
When installing, the white plunger need to be pointed towards the back of your car.
After installing the roof rack, you can take some videos and photos in 360 degrees to enjoy a better after-sales consultation.
Precautions when using ROCKBROS Suction Bike Rack:
1. The maximum load of one-bike rack is 20KG. The load-bearing capacity of the second-bike rack and third-bike rack is more than 20KG, but please consider the bearing capacity of your own car.
2. When used on sunroof or glass roof, pls DO NOT open the car sunroof when the rack is installed, and also it is necessary to confirm there are no cracks or small holes on the sunroof before installation.
3. Do not use the bike rack on the convertible top and roadster top car.
4. Before using, please check all the bolts are tightened.
5. Wipe the suction cup and car roof surface with a clean wet towel, prevent the roof rack from sliding due to accumulated water.
6. Make sure there is NO obvious sign of rebound from the cylinder rod.
7. Speed should be less than 120 Km/h when using the bike rack, and please check whether the bike rack still works normally every 2 hours.
8. After using, please cover up the suction cups.
9. There is a video of how to install the front fork on the bike rack in Figure 7, pls watch it carefully to confirm that your bike fronf fork is installed correctly.
10. On normal mountain roads, you need to slow down to reduce speed when turning or going over speed bumps.
Q:When do you need the adapters?
A:ROCKBROS bike carriers are suitable for bike fork widths under 110mm. You can easily install the bike with quick release, but for the thru-axle bike, you need to buy an adapter separately.
Q:What size for the adapers do we have?
A:9mm*100mm，12mm*100mm, 15mm*100mm, 15mm*110mm, 20mm*110mm, total 4 sizes.
Q;What is included in the package?
A;Bike carrier+Rear wheel suctions+Hook and loop strap for the crank+Standard accessories come with a quick release(4.4mm*100mm)and adapters (5mm*100mm).
Q;What can you do if the suction cup could not work normally(the white line is always visible)?
A;Please notify us, we will resend you the new replacement suction cups at once!
About this item
【EASY INSTALLATION】With quick release fastener and synthetic rubber sucker, it is easy to fix your bikes on the car roof. The weight of our bike rack is between 2.1-4.5kg, it is portable to carry and install. And there is a installation video in the Picture 7, please follow the instructions or the installation video.
【NOT DAMAGE YOUR CAR】Synthetic rubber suckers are sucked on the car roof, will not damage to the paint and sheet metal of your car, and the maximum load capacity of each bike on the car bike rack is 20kg. This bike carrier for car make travelling with your bikes come true.
【STABILITY&SECURITY】The aluminum alloy body is sturdy enough to hold your bike. Vacuum pumping suction cups ensure firmness of the rack. And the crank is fixed with high-intensity hook and loop fasteners, which could prevent pedals from attriting roof of cars.
【COMPATIBILITY】Roof top bike rack for one, two and three bikes, are suitable for most bicycles, and could be used for all almost vehicles like sedans, coupes, hatchbacks, SUV, vans, and more. Meets your need to transport your bikes during road trips or camping excursions.
【LOW WIND-RESISTANCE】Cabinet and delicate rack shape could controll wind resistance, and also greatly lower the noise, let your driving environment be more comfortable. ☆☆PLEASE NOTE: This sucker bike rack is quality guaranteed, we provide after-sale warranty. If you have any questions or suggestions, please feel free to notify us, we are fully at your service.
Save on ROCKBROS Suction Cup Bike Rack for Car Roof Quick Release Sucker Mount with a ROCKBROS discount code
Checkmate is a savings app with over one million users that have saved $$$ on brands like ROCKBROS.
The Checkmate extension automatically applies ROCKBROS discount codes, ROCKBROS coupons and more to give you discounts on products like ROCKBROS Suction Cup Bike Rack for Car Roof Quick Release Sucker Mount.
Checkmate users have also been loving these products from ROCKBROS.
Users have been saving products like this to their collections.
