Key Benefits: Cures At 270° F Low Bleed For Poly Blends Universal For Variety Of Fabrics Compatible with Color Mixing System  Non-Phthalate  Highly Opaque Short Body Semi-Gloss Soft Hand Rapid Cure Dark Red Screen Printing Plastisol Ink by Screen Print Direct® is a premium plastisol ink that cures as low as 270°. Rapid Cure Plastisol Ink is the ideal ink when working with a variety of materials. This low bleed ink works great with a wide variety of blends including polyester. Say goodbye to garment shrinking and scorching with low-temperature cure fabric ink. The ink's lower cure temp saves production time and helps ensure the garment is cured properly without expensive conveyor dryers. The ink's texture is creamy and short-bodied. The color is vibrant, bold, and opaque. For darker garments, we recommend printing with an under-base. This color is a part of the Rapid Cure Plastisol Color Mixing System.  Rapid Cure CMS-Color Mixing System: Our Color Mixing System is designed, so you can order less ink and create more! Create 1800 colors in the pantone system with just 15 colors. If you’re interested in trying out all 15 colors, you can access our color kit and try the whole thing out instead of just one color. Best of all our color mixing system software is FREE! Click here or message us directly to gain access to our color mixing software. Disclaimer: All colors are approximate and will vary from monitor to monitor. For more information on low-temperature cure inks take a look at the blogs we have below. Low-Temperature Cure Inks For Dummies Low-Temperature Cure Inks For Dummies Volume 2 Plastisol Ink Prep   Curing: Cure at 132° C/270° F Flash at 82-104° C/180-200°F Flash and Curing Guidelines: Generally it will take 5-10 washes to fully test the cure, but if the ink is seriously under-cured, the print will show deterioration after only 1-3 washings washes. Another way to test your print quickly is doing the “Stretch Test” stretch the print roughly 2/3 of the T-Shirt; if the print cracks and does not retract back it means you under-cured. General Testing:  Before you do any large print, we recommend doing a stretch test and a wash test to ensure you cured and printed correctly before going into production. Increase cure time if testing fails. We recommend only using natural fibers best results will be seen on 100% cotton. Clean-Up: On the press: Ecotex® Plastisol Press Wash/Ink Degradant In the sink: Ecotex® Plastisol Screen Wash/Ink Degradant ✔️Pro Tips: Plastisol inks do not dye fabric like the traditional inks. Plastisol inks wrap around the fibers and make a mechanical bond with the fabric. Store plastisol inks at room temperature. Prolonged exposure to temperatures above 90º F (32º C) can cause the ink to start to cure while it's still in the container. We highly recommend printing with an under base white when printing on a dark garment Click Here For Safety Data Sheet Click Here for Rapid Cure Color Guide and Hex Codes