Boot and Leather   This is our development of a stitchdown build crafted alongside the classic Richmond pattern. For the first time on our Richmond models, the toecap build is with double leather. This means that there are two layers of upper leather used in the toecap design. One could compare this to taking an Allen pattern and then putting an additional layer of leather over the toebox to make the double leather build.    The upper leather used in this style is the full grain Waxed Rough-out article from the Charles F. Stead tannery. This article was tanned to our specifications using both an oil base and a wax finish to allow ease of conditioning over time. This means that you can use either a wax or an oil, as opposed to one or the other, to take care of the leather over time. The nap is finished with wax on the surface.    The primary color in this upper leather is a very dark olive green. Since it is an olive-named color, you may see some subtle shades of brown as well depending on your light. Depending on the lighting and setting in which you have the boots, it will be common to see any of these colors and slight variations of them.   Grade   1 - Sanding came closer than usual on the tips of the toeboxes for the pairs listed. Toecap stitching might have a slight wave to it.  Our build focuses on enhanced breath-ability and shock absorption in a more natural way by using leather components. Additional build information along with cutaways can be found under our Craft + Build section. Leather care Click here to find out how this leather should be treated. Have a question before, during or after your purchase? Reach out to us at info@parkhurstbrand.com and we would be happy to assist you.