Achieve our authentic mineral lime-paint finish with subtle visual movement, richly pigmented colors, and soft texture effects which naturally occur during the brushed application. This premium architectural lime wash paint can be applied to both drywall and brick surfaces and creates an exceptional, matte finish. Our collection consists of 36 exclusive limewash colors.  To shop these colors individually, click here to shop by color. Our pure mineral formulation is US made and stays true to the tradition of European limestone paint finishes. Drywall and previously painted surfaces should be prepared with Lime-Prep Primer before application of this paint for proper adhesion.  For masonry limewash applications, the finish can be distressed after application on both interior and exterior walls. Coverage: 300 square feet average coverage per gallon with two coats (75 square feet of coverage average per-quart container). Our lime paint is a thin viscosity and spreads easily and quickly with a Limewash Paintbrush. Fresh and healthy: This limewash paint is a zero VOC, natural mineral finish with no synthetic or added binders. A healthier alternative to common paints. Virtually no odor. Easy to use: Pre-blended James Alexander Limewash paint is a pleasure to paint with and very forgiving. Easy-to-follow instructions are included. Easy cleanup with soap and water. Versatility: Can be diluted with water for a more transparent limewash finish. Add Limewash Densifier for a less chalky and more durable finish on interior walls. Best way to sample: Limewash Sample Jars to color sample in situ. Also, hand-painted sample cards are available for purchase   More about James Alexander Limewash Paints Lime mineral paint is known for its almost unearthly luminescent quality that is achieved while maintaining a nearly dead-flat sheen. It is the calcite crystals that form in the curing limewash that refract light and produce a beautiful visual glow.  Add beautiful color, depth, and dimension to your walls with this ready-to-use paint.  Coverage rates of approximately 300 sq. feet per gallon vary based on surface porosity and the number of coats required to produce the desired effect. Please remember that digitally displayed colors vary by screen and brightness settings and are representative only.