Features Smooth, glossy, color finish. Made from durable TPU material for high-performance protection. Durable, high-performance, self-adhesive film. Equipped with a heat-activated, self-healing topcoat. Hydrophobic with UV and stain-resistant properties. Offers supreme protection to the underlying surface Scratch-resistant and anti-corrosion.  Heat and UV resistant. Easy to apply and maintain. Acrylic-based, robust adhesive. Easy to slide and reposition.   Specifications Application Method: Wet Application. Color: Crystal White. Finish: Ultra Gloss. Sizes available: 5ft x 3.28ft. 10ft, 16ft, 33ft, and 49ft. Packaging: Roll.  Things You Should Know: Best Paint Protection Film (PPF) How To Apply Paint Protection Film  PPF Vs Vinyl Wrap How Long Does Paint Protection Film Last? How Much Does  Paint Protection Film Cost? Video Structure Functions Recommended Uses ▲ Standard Size & Appearance Classification Unit Specs Remarks Thickness Top protected film μm 50±2% PET Self-healing Layer μm 15±2% / Face Film μm 160±8 Thermoplastic Polyurethane Acrylic Adhesive μm 25±2% Solvent-based Release liner μm 85±2% Satin Semi-transparent White Surface — Glossy & Transparent Super Glossy without Orange Peel Width m 1.52±0.01% 4.98ft Length m 15±1% 49.21ft Physical properties ▲ General Properties Features Test Method/Conditions Data Gloss（60°） GB 8807 ≥90 Water Contact Angle DL/T864 Appendix A ≥75 Hardness GB/T 6739 ≥90 Elongation at Break GB/T 1040 ≥340% Coating Elongation at Break GB/T 1040 ≥85% Tensile Strength GB/T 1040 ≥20 MPa Peel Force GB/T 2792 ≥800 Scratch Repair (0.1mm) Copper brush & Heat gun Thermal Self-Healing Stain Resistance (oil-based pen) GB/T 16422.2 No Marks Acid & Alkali Resistance Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h No Marks Yellowing ΔE QUV Method 2000h ≤2.4 Application Temperature / +20℃ to +30℃ Service Temperature / -50℃ to +110℃ Recommended Shelf Life 15-25°C or 59-77° F and 45-50% Humidity 2 years Time limits Must use it within 3 months after receiving the wrap film 3 months   Recommendations Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquidApplication method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.Aftercare: PH neutral. Avoid wax or solvents. CAUTION!  1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.   2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.