The Terp Chasers Club Universal Baller is a super versatile diffuser style (housing fits over the bowl) ball vape setup which allows for four different ways to vape your herbs. The Universal Baller can be used as either a wired or wireless setup and provides the ability to switch between a Titanium or Quartz air path. Please check this link out to see how to change between the different setups!Wired and wireless setups work a little differently from each other. Wired setups allow for continual back to back vaping at a consistent temperature so are great for people find they either like to take lots of smaller back to back inhales, or regularly empty and refill their bowl for another one immediately after. Wireless setups provide a little more freedom of movement since you can leave the housing in the coil on the base to heat, then remove it when you want. The difference being that you then need to replace the housing onto the base when the inhale is finished, to allow it to reheat briefly which is ideal for slightly more laid back vapers.  This is a full convection vaporizer with glass bowls, because of this, during vaping we advise that the heater housing should be held in place on the bowl whether being used wirelessly or wired. This will also ensure that you have a good seal between the housing and the bowl and when used in the wired format will avoid undue stresses on your glassware from the weight of the device. When run with the quartz setups there are also two different airflow options. You can either use the "fritted disc" which is a quartz pad that provides more limited airflow or the high airflow disc which is a quartz disc with holes in it. Each of these options provide top quality flavour but the experience is a little different so we suggest giving each a go to see which you prefer (high airflow disc is out favourite!). The Universal Baller comes as standard with all glass bowls so that for those running the Quartz setup inside the housing, a full glass air path can be achieved. The provided bowl has an 18mm male joint, 14mm joint bowls will be available separately. For now we suggest grabbing an 18-14mm joint adapter if you only have 14mm water tools.  Alternatively you can use a carbed pass through adapter or ash catcher with 18-14mm joints.  Tips: Always leave a small space above your herb to avoid the top layer being singed by the heater Don't tamp your herb hard as this will push it into the screen of the bowl, reducing airflow Hold the housing in place on the bowl to ensure a proper airflow seal Use a medium grind if possible to ensure the best balance between airflow and extraction power If you have a high airflow bubbler, probably go straight to the high airflow disc if running the quartz airflow setup in the housing Particularly if you're using one of the bowls with a glass screen, as provided in this kit, we suggest putting an ash catcher in between the bowl and your bubbler to trap particles.  Recommended Temperature Range: Wireless: 490F-610F Due to Quartz manufacturing tolerances, each device may have slightly different operating temperatures.  Quartz setup takes up to 10 minutes to heat from cold, Titanium takes around 5 mins.  Wired: 400F-570F A heat soak of the bowl for 15-45 seconds will improve performance especially at lower temperatures Multi Material Options: Use the Quartz insert for an all glass (direct) air path! Remove the Quartz insert for an all titanium ball vape with a massive 1000 pcs ruby chamber! So if your Quartz breaks, you're not out of luck! (Replacement inserts are also available separately) Wired or Wireless...Why choose? The Universal Baller can be configured for wired, or wireless use out of the box! Is it hot yet?... Peek through the glass screen at the top of the vaporizer to see if your rubies are heated! If the rubies have darkened, you're ready to go! Kit Contents: Universal Baller Housing (Grade 2 Titanium) (with wired adapter) Quartz Insert Laboratory Fritted Disc Wireless Handle 1000pcs 2mm Ruby balls 25mm 200W Enail Coil (220v - not compatible with US power supply) 22mm Diffuser Glass bowl with 18mm Joint Universal Baller Wireless Docking Station Crossing Tech PID controller with power cable (220v UK 3-pin plug) 3x Machined screens Crossing Tech Scoop and tamp Allen Key for Wireless Docking Station Aluminum Multipurpose Filling Aid Quartz High Airflow Disc Ecosystem Parts: These parts can all be found in the Universal Baller Collection linked here Conversion Kit - If this is being used with different heating coils such as the Vapvana Ace Hot Hole, temperature settings will be a little different (higher with the hot hole)   Replacement Heater Coil  Fritted Disc and Quartz Housing Insert High Airflow Disc Regular All Glass Bowl Microdose All Glass Bowl Hybrid Bowl Screenless Bowl Mesh Screen Pack PID Controller and coil covered by lifetime warranty First replacement if needed is covered free of charge (for international orders there will be a shipping charge) Further replacements will be heavily discounted at 35% off the retail price Warranty is against defects, not damage or misuse "Lifetime" covers the retail lifespan of the product. Once it is no longer being produced the warranty will expire  As always this warranty is liable to change if updated by Terp Chasers Club.  PID and Coils are Crossing Tech wiring. They are not compatible with Qaromashop or other wiring setups. Confirmed compatibility with Vapvana, CH, Auber, Disorderly Conduction (DC) and 710 Coils controllers.  Quartz/Glass components not covered if broken This product cannot be shipped to Germany or Austria at this time due to customs regulations. Terp Chasers Club is looking into finding a retailer based in the EU.