The Armored Cap by DynaVap has been designed to provide larger clouds and more thermal mass to any DynaVap Tip. Being much thicker than the original DynaVap Caps and Captive Caps, the Armored Cap allows full extractions from your DynaVap in just two heat cycles. It is even possible with smaller loads (or if you disrespect the click) to get a full extraction from your DynaVap in one heat cycle! Spend less time heating and more time vaping! Much like the Vaphit Silver Collar and FMJ, the Armored cap also allows the DynaVap to be heated without the need to spin it during heating. All in all this makes for a more powerful and lower input vaping experience. A worthy upgrade from the originals. If you already have a VSC or FMJ this cap is not needed, if you don't it makes for a similar experience in a similar sized cap. With the XL VSC providing slightly more thermal mass and easier one heat extractions.  Includes 1 x Armored Cap DynaVap Tip Compatible Induction Heater Compatibility may vary!  "Induction Heater compatibility varies due to the increased diameter of the cap (12mm). When used with an induction heater it may require multiple heat cycles to achieve the same results as a torch. Does work with The Wand with no adapter. The Armored Cap retains heat for an extended period of time and has therefore been designed with a tighter fit on your VapCap tip to reduce the likelihood that it will fall off during use. As a result, the Armored Cap may scratch certain titanium and PVD colored tips and caution should be used in the placement and removal of the Armored Cap from your device. Scratches are normal and do not affect the performance of our tips or present a health risk. "