Golden and decent, TeckWrap Gold Pearl represents noble and reputable. It’s a wrap of dignity, perfect for those looking to spice up a car with a splendid appearance. Order now to impress. With a collection of 10 stylish colors in both matte and gloss material, TeckWrap offers you this series of white chameleons vinyl wrap, which gives your vehicle a distinctive finish where it is partly shady with extraordinary luster. As a proud supplier, TeckWrap has many film selections with good conformability and durability. The material is stretchable enough to wrap every edge and the recessed area quickly. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high quality but reasonable and affordable.   Specifications Conformable and highly flexible PVC material can be molded to almost every part of a vehicle. Suitable for complete car wrapping (or any other smooth or curved surface). The thickness of the film 0.15mm The thickness of film with release liner: 0.31mmType of film: High-grade polymeric calendared vinyl film with air-release channels  Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)Storing period: 2 years if stored at +10°C to +20°C, with relative humidity of 50%, in the original package, away from direct sunlight, clean and dry placeDurability/Warranty: Datasheet (Click the link)Dimensional stability: shrinkage of less than 2%Plastification: between 23%-32%Breaking Strength: 25.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-058.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04Light Ageing in UV Exposure:Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 4-5Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)°C BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)°C BPT, Exposure duration: 48h Install tips: Temperature: from +17°С to +19°С, usage from -45°С to +45°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surface Directional: yesOverlap width: 3-4mm Post heating: 100°C; cure time: 48 hoursPackage: Roll width 152 cm, length 18 m, weight 14 kg Important note: The images, colors, and finishes on the screen are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out. The warranty does not cover the scratching of the film.