If you’re looking for a symbol of power and strength, TeckWrap Navy Black is for you. It generates potential and keeps you confident on different occasions. Wrap it now and embrace new possibilities. With a collection of 15 fancy colors, TeckWrap offers this series of matte metallic vinyl wraps that give your vehicle a subtle look of metallic steel with a flat finish. As a proud supplier, TeckWrap has many film selections with good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high quality but at reasonable and affordable prices. Specifications Conformable and reliable multilayered polymeric material with stable color pigments. Suitable for complete car wrapping (or any other smooth or curved surface). The thickness of the film (um): 121The thickness of the release liner (um): 180Type of film: High-grade polymeric calendared vinyl film with air-release channels Series: 190 series Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. (ISO 9001, ISO 140001, OHSAS 18001)Storing period: 3 years if stored at +10°C to +20°C for optimal quality, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place.Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.04-0.12, Result:0,1 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1254 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥7.85, Result: 11,17 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Post heating: 100 CelciusAging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue Install tips:Application: +17°C-18°C, usage from -45°C to +45°CTools: soft squeegee with bufferConformability: flat and moderate curves. Deep recesses with inlaysDirectional: yesOverlap width: 4-5mm Package:  Roll width 152 cm, length 18 m Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.