Bring the shade of lavender with you in TeckWrap Spanish Lavender. It’s a color with a fragrance that soothes along the journey. Wrap now to make your ride comfy. TeckWrap offers new, very gloss HD colors that give your vehicle a solid as well as shiny finish. Smooth one without any orange peel. The material is stretchable, and one can wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstalling. The film has a PET protective layer, which helps avoid scratches during the installation process (it should be peeled off before heating), and a plastic liner makes the film's surface more glossy and reflective.  Specifications  The thickness of the film(um): 110The thickness of the release liner(um): 142Type of film: High-grade polymeric calendered film with air release Adhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease liner: Plastic linerStoring period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place. Important: the top protective layer should be removed before installation, and the film should be stored without the protective coating to prevent "tunneling."Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.10-0.30, Result:0,18 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1015 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥4.9, Result: 8,1 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue Package:  Roll width 152 cm, length 18 or 23m Install tips: Application: from +16°С to +18°С, usage from -30°С to +45°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surfaceDirectional: noOverlap width: 3-4mm Post heating: 95 Celcius  The protective cap should be peeled off before installation. Important note: The images, colors, and finishes on the screen are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.