Conformable and flexible PVC material with silver coating. Suitable for car wrapping (or any other smooth or medium curved surface). Comes with a selection of 14 reflective colors to create the distinctive appearance and improve a car's aesthetics. We recommend using a steam vacuum or IRR heater for installation. Thickness of film: 0,11mm Thickness of film with release liner: 0,29mm Type of film: Polymeric vinyl film (silver coating) with air release channels Series: 180 series Adhesive: Henkel solvent based moderate adhesive Release liner: White silicone-coated paper with double-sided polyethylene coating Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place Indoor life: 4 years when followed rules of application and use Outdoor life: 2 years when followed rules of application and use Application: from +17°С to +25°С, usage from -35°С to +35°С Dimensional stability: shrinkage less than 0,20% Plastification: between 23%-31% Package: Roll width 152 cm, length 18 m, weight 13 kg Important note: The images, colours and finishes on screen are approximate. For the real representation of the product always check the color swatch. Rolls from the same production lot number should be used for completing a wrap job as a slight batch to batch variation of color may occur. One need to handle metallized films with care as the appearance of the metallized layer could change upon crumpling, overstretching, too strong heating. Film may scratch during application, or during day in and out use. Scratching of the film is not covered by warranty.