Puff Patterned Heat Transfer Vinyl Printed on HT- Printable Puff *TTD Easy Mask Provided*All patterns are printed as shown in the swatches. • HTV4U Puff Patterned Heat Transfer Vinyl is the perfect media for your needs! • Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply TTD Easy Mask to transfer design off of the backing and place on your garment face up. • We have a tons of variety and colors for you to choose from! • Quantity discounts available! *This product is excluded from all promotional discounts and offers. ORDER DESCRIPTION CUTTER SETTINGS Cricut:Blade: StandardSetting: Iron On Silhouette Cameo:Blade: Standard, 3Material: Heat Transfer, SmoothSpeed: 8Force: 6 Scan N Cut:Blade: Standard, 2Cut Speed: 1Cut Pressure: 1 Roland GS/GX-24:Blade: 45°Gram Force: 80-90Offset: 250Speed: 25-50 cm/s Graphtec:Blade: 45°Gram Force: 9Tool: CB09U+0Speed: 25 cm/s MH, SC2, LP3, & Titan 1:Blade: 45°/60°Gram Force: 80-85Speed: 300mm/s*Blade Advancing Varies Titan 2 & 3Blade: 45°/60°Gram Force: 60-65Speed: 300mm/s*Blade Advancing Varies Settings may vary based on blade condition and age of machine.Always perform a test cut prior to cutting designs. APPLICATION INSTRUCTIONS Application Instructions (home iron)• Set iron dial between Cotton and Linen• Cover design with Kraft paper or non-stick cover sheet• Place on flat, hard surface (ironing board not recommended)• Press iron with medium/firm pressure (do not slide iron)• Press each section of design for 10-12 seconds• If areas of design lift after application, replace cover sheetand re-press for 10 seconds• Peel carrier hot Application Instructions (heat press)• Cut material – don’t mirror!• Weed excess material• Mask with TTD High Tack Mask• Preheat garment for 2-3 seconds• Apply design at 280°F~290°F (137°C~143°C)• Use medium pressure for 8-10 seconds• Peel carrier hot• Cover and reheat for 2-3 seconds *Please consider that puff vinyl colors will turn lighter after puffed. RECOMMENDED ACCESSORIES & CARE Patterned Vinyls Apply to:100% cottonPoly/cotton blends100% polyesterLeatherLycra®/spandex Recommended Accessories:Siser WeederSiser TTD Mask Laundering:Wait 24 hours before 1st washMachine wash cold / mild detergentDry on normal dryer settingDo not dry cleanDo not bleach CUSTOM PATTERNS AND DESIGNS Have your own patterns you want to print?Send us an email!heattransfer4u@gmail.com