ECO Kit = Basic Delete kit which retains existing (stock) muffler Quick Links: Here are your instructions Here are your required Tuning options The only sensor installed on the exhaust is the primary O2 located at the top of the DPF all other exhaust sensors can be disconnected from the harness. Description Increase the performance, reliability and fuel economy of your 2015 VW Jetta/Passat TDI by eliminating the restrictive Diesel Particulate Filter (DPF), Exhaust Gas Recirculation (EGR) system, Adblue Injection system and factory catalytic converters, thus allowing the exhaust to flow more freely. This 100% Bolt-On package includes all the hardware you will need for a complete DPF, EGR & Adblue delete. This ECO Kit (Economy Package) is designed to eliminate the Diesel Particulate Filter, Exhaust Gas Recirculation system as well as the factory catalytic converters and Adblue injection system while utilizing the stock muffler and tail pipe. With this setup you should expect that the exhaust will be just slightly louder than stock but not by much since the stock muffler remains in place. If you are looking for stock like silence, we highly recommend one of the Resonator options. The DPF Delete downpipe is built to last with 304 grade stainless steel and the world's most reliable aftermarket flex pipe. Rawtek has engineered this downpipe to be as good as it can be. With a smooth flare from the turbo outlet to the large 2-3/4" ID constant diameter tubing, nothing will outflow this downpipe. There is even a centering sleeve on the inlet which helps locate the downpipe on the turbo as well as maximize exhaust flow and prevent leaks. Installation time Installation time will vary greatly based on experience, know-how and having the right tools and lift, so please take the following prediction with a grain of salt. This is simply a general idea of how long it could take in an ideal situation: Give or take 5 hours, and for max performance, around 6 hours. What's in the box DPF, EGR & Adblue Delete Downpipe DPF, EGR & Cat Delete Midpipe Hardware Kit - for VW TDI CR150 EGR Cooler Bypass Kit EGR Block Off Plate Exhaust Clamps, Nuts Bolts, Etc. Reducer 3" to Stock Benefits: Up to 185 horsepower (+35 hp) Up to 323 ft-lbs torque (+73 ft-lbs) Up to 20% better fuel economy (+10 mpg) Longer turbo life (no more DPF) Clean Air Intake Manifold (no more EGR) Longer engine oil life (no more EGR) Fix intercooler icing problem (no more EGR) Features: 304 Stainless Steel Construction Downpipe: 3" OD Schedule 10 pipe (1/8" thick) Midpipe: 3" OD 16 gauge tubing Stainless Steel EGR Cooler Bypass Kit Aluminum EGR Block Off Plate Easy to follow step by step installation guide (see below) 100% bolt-on Fitment: Will fit the following North American spec vehicles with DPF (diesel particulate filter): VW Jetta 2.0L CR150 TDI (2015+) VW Passat 2.0L CR150 TDI (2015+) Related Video: