Removable footrests Seat belt & wheel locks for extra safety Washable, stain-resistant nylon fabric Supports up to 300 lbs (136 kg). Lock mechanism for back support. Footrest peg, wheel lock, footrest receptacle, footrest locking device, footrest height adjustment. Seatbelt, seat rail. Walgreens pharmacist recommended.^ Learn more about Walgreens brand products ^Our pharmacists recommend the Walgreens brand. **Satisfaction Guarantee valid on Walgreens owned brand products only. Made in China 100% satisfaction guaranteed How to Operate Your Transport Chair: To open the chair, tilt to one side and push down on seat rails. Lift back support to upright position. The lock to secure the back will engage automatically. To fold down and store, pull up on locks simultaneously and carefully fold down the back support. To attach footrests, align the holes on the footrest arm with the pegs on the frame of the transport chair. Rotate footrest inward until securely in place. To adjust the length of the footrests, loosen plunger knob and push in both of the push buttons on the telescoping tube shaft, adjust to desired height and re-tighten plunger knob. The lowest part of the footrest should not be less than 2 1/2 inches from the ground to permit proper clearance. To remove the swing-away footrest, release the lock. Swing outward and rearward. Simply lift up and off to remove the footrest. Footrests can be stored when not in use by clipping them into the footrest receptacle on frame. The safety belt is already attached for use and should not be removed from the transport chair. To engage wheel locks, push the wheel the lock lever toward the front of the chair to engage the lock. Pull back on the lever toward the rear of the chair to disengage the lock. Wheel locks are not brakes. Attach the side pouch with the four straps to both sides of the arm pad and to the frame. This can be used on the left or right side. Note: The transport chair should not be operated without the assistance of an attendant. Maintaining Your Transport Chair: Walgreens recommends periodic visual inspection of this product by the user to ensure that all parts and hardware are secure, that components are in good working order and not worn, torn, frayed or loose, and that there are no obstructions or impediments to normal, safe operation. If any part or mechanism appears to be unsafe or compromised, do not use the product. If experience problems, please contact the provider that sold you the product, or Drive Technical Support at 866-621-4933. At least once a week, wipe off frame using a clean, soft cloth. If the chair is exposed to moisture, dry the chair immediately. The metal parts of the chair should be polished once a month with an auto wax. Clean the upholstery with a mild soap solution, rinse and wipe dry. Worn or torn upholstery should be replaced promptly as it may not support your body weight. Inspect the wheels at least once a month, correct any side play by loosening the lock nut on the axle, then tighten the axle just enough to remove side play. Solid rubber tires require limited upkeep, but need to be cleaned periodically with a damp cloth. Solid rubber tires need to be replaced if they become cracked or severely worn. ©2021 Walgreen Co.