Custom Metal Stamp For Pottery, Signature Clay Stamp, Custom Signature Stamp For Ceramics, Makers Mark Stamp For Pottery, Custom Tiny Metal Pottery Stamp, Gifts For Potters ---------Products--------- Metal Stamping Stamps: Suitable for stamping aluminum, brass, copper, gold, silver, etc. (Also suitable for hot stamping on annealed steel and steel) 1.The black area of the logo will be raised on the stamp. 2.The logo can be small enough (starting from 2mm), but the line thickness of the logo must not be less than 0.2mm, and the minimum diameter of the steel rod is 8mm. 3.The length of the stamp steel rod: from 70mm to 100mm (depending on the size of the logo) 4.The stamp is laser engraved with 1mm-1.5mm depth 5.Do not send a mirror image (the image will be mirrored, you do not need to do this) 6. If the stamp size is small, you must note that it may not be clear due to the size. To better imagine how your stamp will look at a specific size, please reduce the image to the size you want, print it on paper and see the effect (the lines of the image should not be smaller than 0.2 mm) ---------How to process the order--------- 1. Send me the design you have via Etsy message (clear black and white JPG/PNG/PDF file). 2. If you have a vector file, please send it to my email: (wisokyfreddieswzm@outlook.com) 3. If you want me to design it for you, please draw it yourself and express it in as much detail as possible. 4. I will review the design with you within 24 hours. Please keep an eye out for messages from Etsy!! If I don’t hear from you after 24 hours, I will start making it :) ---------How to use--------- 1. You need to place the blank on a hard, smooth surface (such as an anvil or steel plate). 2. Then hold the stamp perpendicular to the blank and use a heavy hammer to hit it forcefully and accurately (don’t worry about using too much force). 3. If you don’t have enough strength to complete the operation, you can ask someone to help or use a press. Note: 1. The brass "hammer" does not fit these stamps 2. If the stamp is rusted, wipe it with a regular hard sponge and then boil it in water with baking soda for 10 minutes. 3. For larger stamps 20 mm and above, it is difficult to achieve the best results with a hammer, so a press is recommended. 4. If the stamp is not used for a long time, it is recommended to lubricate it with oil. You can click this link to view all designs in my store: https://www.etsy.com/shop/ElenaAndHerToys I am committed to providing the highest quality products and customer service. Please contact me if there is any problem with the product. If you are satisfied with the products and services, you can share your shopping experience on ETSY! Best wishes!