Wall Holder for Smith & Wesson Shield Plus 2.0 3.1" 9mm The Wall Holder puts slight Pressure on the polymer frame and slide for secure mounting of the gun. Doesn't insert anything into the barrel and allows for the gun to be stored loaded. Designed for bedside/chairside accessibility without taking up table space and preventing accidents. The mount comes off the wall at a 30-degree angle for practical and efficient drawing. The mount is secured with two 1-inch screws into drywall anchors to prevent any twisting and eliminate the possibility of it falling or being pulled off the wall while putting the gun in or pulling it out. Can be drilled into wood without anchors with the included screws if you line it up with a stud. The top of the mount is funneled for easier mounting. The mount is made of solid plastic. installation Procedure: 1. Hold Mount in the desired location, tap the holes inside the mount with a screw or screwdriver 2. Remove the mount and make a hole the size of the anchor in the wall 3. Instal the anchors into the holes 4. Line up the mount holes with anchors and hand screw the screws into the anchors, using a drill risks over-tightening and damaging the anchors and the mount Reach out with any questions or for other desired custom designs Sole Owner of Design