HomeMech-2002 SMART SWITCH AND DIMMER The push button smart dimmer is a Z-Wave device designed to work with various types of light sources. It is connected to a two-wire configuration so it operates without neutral lead. The dimmer can switch or dim connected light sources either through Z-Wave devices or push button or through the wall switch connected directly to it. The dimmer can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery-operated nodes within the network will act as repeaters regardless of vendor to increase the reliability of the network. Compatible with Clipsal Classic Faceplates, such as 30 Series Clipsal and HPM wall plates and also our range of Slimline Faceplates, plus many, many more. Simply remove the old switch mechanism and insert the Smart Dimmer Switch Mech. Features: Compatible with any Z-Wave or Z-Wave+ Controller, • Controlled by universal Z-Wave controller, Advanced microprocessor control, Implemented algorithm of smart light source detection, • Auto-adjustment of the appropriate control mode to connected load, • Active power and energy metering functionality, Soft start function, Memory of the last lighting level settings, Works with various types of switches – momentary, toggle, etc. To be installed in Australian standard wall switch plate, The Bypass is an extension unit. Order Code: HomeMech-2002 Z-Wave Frequency: 921.42 MHz (ANZ) Input Voltage: AC100-240V Output Voltage: AC100-240V Output Current: 1.5A max. Operating Temperature: 0°C to 40°C Relative Humidity: 8% to 80% Dimensions: 45 x 21 x 21mm