GTECHNIQ W9 WATER SPOT REMOVER W9 Water Spot Remover is a concentrated formula which is 100% coating safe. Unlike standard single mechanism water spot removers, W9 has a three mechanism approach to removal. It dissolves and removes salts. Traps metal ions, which are commonly found in tap water, and finally, removes silica scales which are traditionally very tough to eliminate. Hard water spots and silica scale will disappear from the exterior surface with ease. The formula works well on glass, where traditional watermarks are exceptionally hard to remove. Use W9 on all paint types, including matte finishes. While water spot removers are a good first step, they don't always work on their own. If deep, additional steps, such as polishing, are needed to fully remove water spots. Features and Benefits Dissolves white water spot marks Traps metal ions to prevent oxidation Removes silica scale without the need for rubbing with a wash mitt Non-contact, spray on formulation helps prevent damage to clear coat Safe for use on vehicles with protective ceramic coatings Safe for use on unprotected clear coats Highly effective at removing water spots on glass Can also be used on vinyl Suitable for use on matte paint finishes Instructions: Use after washing and drying your car Do not apply in direct sunlight Shake well and wear gloves Spray liberally onto a clean Microfibre Buff Cloth, wipe onto an area no bigger than 20x20cm (8”x8”) Buff immediately with a clean MF cloth Repeat as necessary Re-wash your car after use Store in a cool, dry place