FMS 5.8GHz Analog FPV System is a simple and user-friendly entry-level FPV setup. What's in the box: 1 x 5.8GHz 4.3-inch FPV Monitor + Antenna 1 x 5.8GHz All-In-One Analog Camera 1 x Camera Housing With Mounting Base 1 x Monitor Mount 1 x 3.7V Battery (For Camera Use) 1 x 3.7V Battery Charger 1 x Hook-and-Loop Tape 1 x Adjustable Zip Ties 1 x Manual How to Set Up: 1. Securely mount the camera on your RC vehicle (drone/car/boat) using the included hook-and-loop straps or zip ties.2. Install the antenna before powering on the monitor, then use the auto-scan function to find the frequency.3. Begin your FPV adventure! Q&A: 1. Why doesn’t the image look as clear as I expected?Analog video transmission has lower resolution compared to HD systems, resulting in less sharpness. However, it offers low latency, making it great for close-range FPV (within 100 meters).2. Why is the screen flickering and showing static (snow)?This could be due to environmental interference. Try moving the screen further away from Wi-Fi routers or the transmitter. You can also switch the video transmission band or channel to see if that helps (check the manual for how to change the channel).3. Why does the image look so blurry?The camera’s focus might not be properly adjusted. Try rotating the lens clockwise or counterclockwise until the image comes into sharp focus.4. What is the operating endurance of the monitor and camera?When fully charged, the monitor lasts up to 3 hours, while the camera provides up to 20 minutes of use.5. What’s the signal range of the 5.8GHz Analog FPV System?The effective range is up to 150 meters in open areas without interference. FPV Monitor Specification: Screen Size 4.3 inches Resolution 480×272 pixels Aspect Ratio 16:9 Brightness 500 cd/m² Input Format NTSC/PAL Auto-Switch AV Interface 3.5mm analog video Operating Voltage 5V DC Charging Port Micro-USB 5V/2A Battery Capacity 3.7V 2500mAh Li-ion Frequency Range 4990-5945 MHz Channels 56 channels Sensitivity -90dBm Antenna Connector RP-SMA (inner pin) Dimensions 123×85×26 mm OSD Display Signal strength/Battery/CH Auto-Scan One-button frequency search Camera Specification: Antenna Type Copper tube Working Current 220mA Voltage Range 2.5-5.5V (5V typ.) Dimensions 13.5×15.9×17.2mm Weight 3.6g RF Power 25mW Channels 48CH Camera 120° FOV, 600TVL Lens f=1.4mm Video Standard PAL