Fits 2013 - 2018 Ram 1500 4x4 & 2wd (including Rebel) If you're looking to get some lift at the same time as your conversion, this is the kit for you! This kit uses Bilstein struts and shocks with our springs, mounts, isolators and spacers. Provides 3" of lift in the front and 1.5" of lift in the rear which will give your truck the perfect lifted look. Includes: Bilstein front struts Front coil springs Front upper strut mounts Front upper control arms Upper strut spacer (if required) Standard rear coil springs or +35% Rear coil spacers Bilstein rear shocks Rear isolators Optional: Front coil spring covers (Recommended for off-road or gravel use!) Fits: 2013-2018 Ram 1500 2019-2020 Ram 1500 Classic (5 bolt wheel only) *Fits all trim levels including Rebel, Laramie, Longhorn and Limited. *Optional Rear Spring - If you tow often, tow heavier weight occasionally or if you occasionally have payload in the box, we would recommend the rear spring upgrade. The standard springs have excellent ride quality but do not handle weight well. Our upgraded rear spring is designed to maintain ride quality while also improving your trucks ability to carry weight. Note - If you choose to upgrade to the JBA Upper Control arms, please be aware that they are larger and much stronger than stock, and as a result they do have slightly reduced clearance between the tire and the upper balljoint. If you choose to run wider than stock tires while still retaining the stock wheels, you may require wheel spacers to clear the upper control arm. Most aftermarket wheels have decreased offset and will clear wider tires without any issues. Note - All of our kits include the use of a programming tool which allows you to remove the "Immediate Air Suspension Service/Repair Required" message from the dashboard. We don't use cheap and unreliable relays like our competitors. Our programming tool is designed to modify the calibration of the BCM so that the truck thinks it never came with air suspension from the factory. This is a permanent solution. If you'd like to get a programming tool with your kit, please select "Yes, I'd like to borrow a programming tool on the option above". This is a refundable charge which will allow us to include the programming tool with your order. We really try hard to keep costs down for our customers, so these are supplied on a deposit "rental" basis. When you're done installing your kit and the programming is done, mail us back the programmer and we will happily refund you the deposit.